 English |
|
|
|
|
|
|
|
| MIC58P01_15 Datasheet, PDF (4/11 Pages) Micrel Semiconductor – 8-Bit Parallel-Input Protected Latched Driver | |||
| |||
| ◁ |
Micrel, Inc.
MIC58P01
Absolute Maximum Ratings(1)
Output Voltage (VCE) ....................................................+80V
Logic Supply Voltage (VDD) ..........................................+15V
Input Voltage Range (VIN) ..................... â0.3V to VDD +0.3V
Operating Temperature Range (TA) ............ â55°C to +85°C
Storage Temperature Range (TS) ............. â65°C to +125°C
ESD Rating(3)................................................. ESD Sensitive
Operating Ratings(2)
Package Power Dissipation, PD
MIC58P01YV .............................................................. 1.6W
Derate above TA = +25°C ..................................... 16mW/°C
MIC58P01YWM .......................................................... 1.4W
Derate above TA = +25°C ..................................... 14mW/°C
Operating Temperature Range (TA) ............ â40°C to +85°C
Electrical Characteristics(4)
VDD = 5V, TA = 25°C, unless otherwise noted.
Symbol Parameter
Condition
Min. Typ. Max. Units
ICEX
Output Leakage
Current
VCE(SAT)
Collector-Emitter
Saturation Voltage
VIN(0)
Input Voltage (Low)
VIN(1)
Input Voltage (High)
RIN
Input Resistance
VCE = 80V, TA = +25°C
VCE = 80V, TA = +70°C
IC = 100mA
IC = 200mA
IC = 350mA
VDD = 12V
VDD = 10V
VDD = 5V, Note 5
VDD = 12V
VDD = 10V
VDD = 5V
50
µA
100
0.9
1.1
1.1
1.3
V
1.3
1.6
1.0
10.5
V
8.5
3.5
50
200
50
300
kâ¦
50
600
One Driver ON, VDD = 12V, Outputs Open
3.3
4.5
IDD(1ON)
One Driver ON, VDD = 10V, Outputs Open
3.1
4.5
mA
One Driver ON, VDD = 5V, Outputs Open
2.4
3.6
IDD(ON)
Supply Current
All Drivers ON, VDD = 12V, Outputs Open
All Drivers ON, VDD = 10V, Outputs Open
6.4
10.0
6.0
9.0
mA
All Drivers ON, VDD = 5V, Outputs Open
4.7
7.5
IDD(OFF)
All Drivers OFF, VDD = 12V, Outputs Open, Inputs = 0V
All Drivers OFF, VDD = 5V, Outputs Open, Inputs = 0V
3.0
4.5
mA
2.2
3.6
IR
Clamp Diode Leakage
Current
VR = 80V, TA = +25°C
VR = 80V, TA = +70°C
50
µA
100
ILIM
Overcurrent Threshold Per Output
500
mA
VSU
Start-Up Voltage
Note 6
3.5
4.0
4.5
V
Notes:
1. Exceeding the absolute maximum ratings may damage the device.
2. The device is not guaranteed to function outside its operating ratings.
3. Micrel CMOS devices have input-static protection but are susceptible to damage when exposed to extremely high static electrical charges.
4. Specification for packaged product only.
5. Operation of these devices with standard TTL or DTL may require the use of appropriate pull-up resistors to insure a minimum logic â1â.
6. Under-Voltage Lockout is guaranteed to release device at no more than 4.5V, and disable the device at no less than 3.0V.
June 5, 2015
4
Revision 2.0
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese