MIC59P50_15 Datasheet, PDF (4/12 Pages) Micrel Semiconductor – 8-Bit Parallel-Input Protected Latched Driver

Micrel, Inc.
MIC59P50
Absolute Maximum Ratings⁽²⁾
Operating Ratings⁽³⁾
Input Voltage (V_CE) .......................................................+80V
Supply Voltage
(V_DD) ......................................................................... 15V
(V_DD – V_EE) ............................................................... 25V
Continuous Collector Current (I_C)..............................500mA
Protected Current⁽⁴⁾ ....................................................... 1.5A
Lead Temperature (soldering, 10s)............................ 260°C
Storage Temperature (Ts).........................–65°C to +150°C
ESD Rating⁽⁵⁾................................................. ESD Sensitive
Electrical Characteristics⁽⁶⁾
Input Voltage (V_IN) .................................. –0.3V to V_DD+0.3V
Operating Temperature (T_A)........................ –40°C to +85°C
Junction Temperature (T_J) ....................................... +150°C
Power Dissipation (P_D)
Plastic DIP (N) ....................................................... 2.4W
Derate above T_A = +25°C ............................24mW/°C
PLCC (V) ............................................................... 1.6W
Derate above T_A = +25°C ............................16mW/°C
Wide SOIC (WM)................................................... 1.4W
Derate above T_A = +25°C ............................14mW/°C
VDD = 5V; TA = 25°C, unless noted.
Symbol Parameter
Condition
Min. Typ. Max. Units
ICEX
Output Leakage Current
VCE = 80V, TA = +25°C
VCE = 80V, TA = +70°C
50
µA
100
µA
VCE(SAT) Collector-Emitter
IC = 100mA
0.9
1.1
V
Saturation Voltage
IC = 200mA
IC = 350mA
1.1
1.3
V
1.3
1.6
V
VIN(0)
1.0
V
VIN(1)
Input Voltage
VDD = 12V
VDD = 10V
10.5
V
8.5
V
VDD = 5V, Note 7
3.5
V
VDD = 12V
50
200
kΩ
RIN
Input Resistance
VDD = 10V
50
300
kΩ
VDD = 5V
50
600
kΩ
IOL
/Flag Output Current
VOL = 0.4V
15
mA
IOH
/Flag Output Leakage
VOH = 12V
50
nA
Notes:
2. Exceeding the absolute maximum ratings may damage the device.
3. The device is not guaranteed to function outside its operating ratings.
4. Each channel VEE connection must be designed to minimize inductance and resistance.
5. Devices are ESD sensitive. Handling precautions are recommended. Human body model, 1.5kΩ in series with 100pF.
6. Specification for packaged product only.
7. Operation of these devices with standard TTL or DTL may require the use of appropriate pull-up resistors to ensure a minimum logic “1”.
July 29, 2015
4
Revision 2.0