MIC5891_06 Datasheet, PDF (4/7 Pages) Micrel Semiconductor – 8-Bit Serial-Input Latched Source Driver

MIC5891
Micrel, Inc.
Timing Conditions
(V_DD = 5.0V, Logic Levels are V_DD and Ground)
A. Minimum data active time before clock pulse (data set-up time).........................................................................75ns
B. Minimum data active time after clock pulse (data hold time)...............................................................................75ns
C. Minimum data pulse width .................................................................................................................................150ns
D. Minimum clock pulse width................................................................................................................................150ns
E. Minimum time between clock activation and strobe ..........................................................................................300ns
F. Minimum strobe pulse width ..............................................................................................................................100ns
G. Typical time between strobe activation and output transition .............................................................................1.0µs
H. Turnoff delay................................................................................................................. see Electrical Characteristics
I. Turn-on delay................................................................................................................ see Electrical Characteristics
CLOCK
DATA IN
STROBE
OUTPUT
ENABLE
OUTN
A
D
B
E
F
C
G
Timing Conditions
H
I
MIC5891
4
May 2006