|
MIC28500 Datasheet, PDF (4/29 Pages) Micrel Semiconductor – 75V/4A Hyper Speed Control™ Synchronous DC-DC Buck Regulator | |||
|
◁ |
Micrel, Inc.
MIC28500
Absolute Maximum Ratings(1, 2)
PVIN to PGND................................................ â0.3V to +76V
FS to PGND ....................................................â0.3V to PVIN
PVDD, VDD to PGND ......................................... â0.3V to +6V
VSW, VCS to PGND .............................. â0.3V to (PVIN +0.3V)
VBST to VSW ........................................................ â0.3V to 6V
VBST to PGND .................................................. â0.3V to 82V
VEN to PGND ...................................... â0.3V to (VDD + 0.3V)
VFB to PGND....................................... â0.3V to (VDD + 0.3V)
PGND to SGND ........................................... â0.3V to +0.3V
Junction Temperature .............................................. +150°C
Storage Temperature (TS).........................â65°C to +150°C
Lead Temperature (soldering, 10sec)........................ 260°C
Operating Ratings(3)
Supply Voltage (PVIN) ........................................ 30V to 75V
Bias Voltage (PVDD, VDD).................................. 4.5V to 5.5V
Enable Input (VEN) ................................................. 0V to VDD
Junction Temperature (TJ) ........................ â40°C to +125°C
Maximum Power Dissipation......................................Note 4
Package Thermal Resistance(4)
5mm x 6mm MLF® (θJA) ....................................36°C/W
Electrical Characteristics(5)
PVIN = VFS = 48V, VDD = 5V; VBST â VSW = 5V; TA = 25°C, unless noted. Bold values indicate â40°C ⤠TJ ⤠+125°C.
Parameter
Condition
Min.
Typ.
Power Supply Input
Input Voltage Range ( PVIN)
30
FS Voltage Range
2
VDD Bias Voltage
Operating Bias Voltage (VDD)
4.5
Under-Voltage Lockout Trip Level VDD Rising
3.2
UVLO Hysteresis
Quiescent Supply Current (IVDD)
VFB = 1.5V
Shutdown Supply Current (IVDD)
VDD = VBST = 5.5V, VIN = 48V
SW = unconnected, VEN = 0V
Reference
Feedback Reference Voltage
0°C ⤠TJ ⤠85°C (±1.0%)
â40°C ⤠TJ ⤠125°C (±1.5%)
0.792
0.788
Load Regulation
IOUT = 0A to 4A
Line Regulation
PVIN = 30 to 75V
FB Bias Current
VFB = 0.8V
-0.5
Enable Control
EN Logic Level High
4.5V < VDD < 5.5V
1.2
EN Logic Level Low
4.5V < VDD < 5.5V
EN Bias Current
VEN = 0V
Notes:
1. Exceeding the absolute maximum rating may damage the device.
2. Devices are ESD sensitive. Handling precautions recommended. Human body model, 1.5k⦠in series with 100pF.
3. The device is not guaranteed to function outside operating range.
4. PD(MAX) = (TJ(MAX) â TA)/ θJA, where θJA depends upon the printed circuit layout. See âApplications Information.â
5. Specification for packaged product only.
5
3.85
380
1.4
0.7
0.8
0.8
0.04
0.1
0.005
0.85
0.78
50
Max.
75
75
5.5
4.45
3
2
0.808
0.812
0.5
0.4
100
Units
V
V
V
V
mV
mA
mA
V
%
%
µA
V
V
µA
June 2011
4
M9999-060311-B
|
▷ |