English
Language : 

MIC2566 Datasheet, PDF (4/10 Pages) Micrel Semiconductor – Single-Slot PC Card/CardBus Power Controller
MIC2566
Electrical Characteristics (continued)
Micrel
Symbol
Parameter
Condition
Min Typ Max Units
VCC SWITCHING TIME (See Figure 2)
t9
Output Turn On Delay Time
t10
Note 6
t11
Output Rise Time
Note 6
t12
t13
Output Turn-Off Delay
Notes 6, 7
t14
t15
Output Fall Time
Note 6
t16
POWER SUPPLY
VCC OUT = 0V to 10% of 3.3V
VCC OUT = 0V to 10% of 5.0V
VCC OUT = 10% to 90% of 3.3V
VCC OUT = 10% to 90% of 5V
VCC OUT = 3.3V
VCC OUT = 5V
VCC OUT = 90% to 10% of 3.3V
VCC OUT = 90% to 10% of 5.0V
200 1500 µs
350 3000
200 700 2500 µs
200 1500 6000 µs
0.65
2
ms
0.7
2
ms
100 300 1000 µs
100 600 2000 µs
ICC5
VCC5 IN Supply Current (5V)
ICC3
VCC3 IN Supply Current (3.3V)
Note 8
VCC5
Operating Input Voltage (5V)
VCC3
Operating Input Voltage (3.3V)
THERMAL SHUTDOWN
VCC OUT = 5V or 3.3V, ICC OUT = 0
VCC OUT = 0V (Sleep Mode)
VCC OUT = 5V or 3.3V, ICC OUT = 0
VCC OUT = 0V (Sleep Mode)
VCC5 IN not required for operation
Note 8
8
50
µA
0.2
10
µA
40
100
µA
0.1
10
µA
5.0
5.5
V
3.0
3.3
5.5
V
TSD
Thermal Shutdown Temperature
FLAG OUTPUT
130
°C
IFLAGLK
VOL
Error FLAG Off Current
FLAG Output Low Voltage
VFLAG = 5V
VCCx IN – VCC OUT > 1V
1mA pull-up from FLAG to VCCx IN
4
µA
0.4
V
Note 1.
Note 2.
Note 3.
Note 4.
Note 5.
Note 6.
Note 7.
Note 8.
Exceeding the absolute maximum rating may damage the device.
The device is not guaranteed to function outside its operating rating.
Devices are ESD sensitive. Handling precautions recommended. Human body model, 1.5k in series with 100pF.
Specification for packaged product only.
RL = 100Ω connected to ground.
RL = 10Ω connected to ground.
Delay from commanding Hi Z or 0V to beginning slope. Does not apply to current limit or overtemperature shutdown conditions.
The MIC2566 uses VCC3 IN for operation. For single 5V supply systems, connect 5V to both VCC3 IN and VCC5IN. See “Applications Informa-
tion” for further details.
MIC2566
4
May 2003