English
Language : 

MIC2566 Datasheet, PDF (2/10 Pages) Micrel Semiconductor – Single-Slot PC Card/CardBus Power Controller
MIC2566
Ordering Information
Part Number
MIC2566-0BM
MIC2566-1BM
MIC2566-0YM
MIC2566-1YM
MIC2566-0BTS
MIC2566-1BTS
Operating
Temp. Range
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
Package
14-pin SOP
14-pin SOP
14-pin SOP
14-pin SOP
14-pin TSSOP
14-pin TSSOP
Pb-Free
X
X
Micrel
Pin Configuration
VCC5_EN 1
VCC3_EN 2
EN 0 3
EN 1 4
/FLAG 5
NC 6
VPP OUT 7 *
14 GND
13 VCC5 IN
12 VCC OUT
11 VCC5 IN
10 VCC OUT
9 VCC3 IN
* 8 VCC OUT
VCC5_EN 1
VCC3_EN 2
VPP Ð VCC 3
VPP Ð PGM 4
/FLAG 5
NC 6
VPP OUT 7 *
14 GND
13 VCC5 IN
12 VCC OUT
11 VCC5 IN
10 VCC OUT
9 VCC3 IN
* 8 VCC OUT
MIC2566-0
MIC2566-1
* Denotes pinout differences. Duplicate pins must be connected together for prober operation.
Example: VCC5IN pins 11 & 13 must be externally connected together.
Pin Description
Pin Number
MIC2566-0
1
2
3
Pin Number
MIC2566-1
1
2
3
4
4
5
5
6
6
7
7
9
9
8, 10, 12
8, 10, 12
11, 13
11, 13
14
14
MIC2566
Pin Name
VCC5 EN
VCC3 EN
EN0
VPP_VCC
EN1
VPP_PGM
/FLAG
NC
VPP OUT
VCC3 IN
VCC OUT
VCC5 IN
GND
Pin Function
VCC 5V Enable (Input).
VCC 3.3V Enable (Input).
Enable 0: Micrel standard logic-control signal. MIC2566-0 only.
VPP_VCC Control: Cirrus Logic logic-controller compatible control signal.
MIC2566-1 only.
Enable 1: Micrel standard logic-control signal. MIC2566-0 only.
Program: Cirrus Logic-compatible control signal. MIC2566-1 only.
Error Flag: This pin requires a pull-up resistor (10kΩ recommended) to
VCC3IN or VCC5IN.
Not internally connected.
VPP Output: 0V (ground), 3.3V, 5V, or high-impedance output.
3.3V-Nominal Supply Input: Mandatory supply, switchable to VCC and VPP
outputs. Also powers MIC2566 internal circuitry.
VCC Output: 0V (ground), 3.3V, 5V, or high-impedance output. Pins 8, 10,
and 12 must be externally connected.
5V-Nominal Supply Input: Optional supply, switchable to VCC and VPP
outputs. Pins 11 and 13 must be externally connected.
Ground.
2
May 2003