SY10EP89V Datasheet, PDF (3/7 Pages) Micrel Semiconductor – 5V/3.3V 3GHz COAXIAL CABLE DRIVER

Micrel
ECL Pro™
SY10EP89V
5.0V PECL DC ELECTRICAL CHARACTERISTICS⁽¹⁾
V_CC = 5.0V ±5%; V_EE = 0V⁽²⁾
T_A = –40°C
T_A = +25°C
T_A = +85°C
Symbol
Parameter
Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit
I_EE
Power Supply Current
V_OH
Output HIGH Voltage⁽³⁾
V_OL
Outuput LOW Voltage⁽³⁾
V_IH
Input HIGH Voltage
(Single-Ended)
27
34
45
30
37
45
32
39
50
mA
3780 3880 3980 3850 3950 4050 3925 4025 4125 mV
2075 2225 2375 2060 2210 2360 2090 2240 2390 mV
3770 — 4110 3870 — 4190 3940 — 4280 mV
V_IL
Input LOW Voltage
(Single-Ended)
3050 — 3500 3050 — 3520 3050 — 3555 mV
V_IHCMR
Input HIGH Voltage
Common Mode Range⁽⁴⁾
V_EE +2.0
V_CC
V_EE +2.0
V_CC
V_EE +2.0
V_CC
V
I_IH
Input HIGH Current
—
—
150
—
—
150
—
—
150
µA
I_IL
Input LOW Current
D 0.5
—
—
0.5
—
—
0.5
—
—
µA
/D –150 —
— –150 —
— –150 —
—
Note 1.
Note 2.
Note 3.
Note 4.
10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit
is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained.
Input and output parameters vary 1:1 with V_CC.
All loading with 50Ω to V_CC – 3.0V.
The V_IHCMR range is referenced to the most positive side of the differential input signal.
3.3V LVPECL DC ELECTRICAL CHARACTERISTICS⁽¹⁾
V_CC = 3.3V ±5%, V_EE = 0V⁽²⁾
T_A = –40°C
T_A = +25°C
T_A = +85°C
Symbol
Parameter
Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit
I_EE
Power Supply Current
V_OH
Output HIGH Voltage⁽³⁾
V_OL
Outuput LOW Voltage⁽³⁾
V_IH
Input HIGH Voltage
(Single-Ended)
22
28
34
24
32
38
28
34
40
mA
2080 2180 2280 2150 2250 2350 2225 2325 2425 mV
620 720 820 630 730 830 670 770 870 mV
2070 — 2410 2170 — 2490 2240 — 2580 mV
V_IL
Input LOW Voltage
(Single-Ended)
1350 — 1800 1350 — 1820 1350 — 1855 mV
V_IHCMR
Input HIGH Voltage
Common Mode Range (Diff.)⁽⁴⁾
V_EE +2.0
V_CC
V_EE +2.0
V_CC
V_EE +2.0
V_CC
V
I_IH
Input HIGH Current
—
—
150
—
—
150
—
—
150
µA
I_IL
Input LOW Current
D 0.5
—
—
0.5
—
—
0.5
—
—
µA
/D –150 —
— –150 —
— –150 —
—
Note 1.
Note 2.
Note 3.
Note 4.
10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit
is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained.
Input and output parameters vary 1:1 with V_CC.
All loading with 50Ω to V_CC –3.0V.
The V_IHCMR range is referenced to the most positive side of the differential input signal.
3