SY10EP89V Datasheet, PDF (1/7 Pages) Micrel Semiconductor – 5V/3.3V 3GHz COAXIAL CABLE DRIVER

Micrel
5V/3.3V 3GHz
COAXIAL CABLE DRIVER
ECL Pro™
ECL_SYP₁r₀o_E™_P89V
SY10EP89V
FINAL
FEATURES
s 3.3V and 5V power supply options
s 3.0GHz typical toggle frequency
s 310ps typical propagation delay
s 1.6V (5V) and 1.4V (3.3V) swing
s Internal input resistors: pulldown on D, pulldown
and pullup on /D
s New differential input common mode range
s Available in 8-pin MSOP and SOIC packages
DESCRIPTION
The SY10EP89V is a differential fanout gate specifically
designed to drive coaxial cables. The device is especially
useful in digitial video broadcasting applications; for this
application, since the system is polarity free, each output
can be used as an independent driver. The driver
produces swings 70% larger than a standard ECL output.
When driving a coaxial cable, proper termination is
required at both ends of the line, while maintaining a
800mV (5V) or 700mV (3.3V) swing at the receiving end
of the cable. Because of the larger output swings, the
device cannot be terminated into the standard V_CC –2.0V.
All of the DC parameters are tested with a 50Ω to
V_CC –3.0V load. The driver accepts a standard differential
ECL input and can run off of the digital video broadcast
standard –5.0V supply.
PIN CONFIGURATION/BLOCK DIAGRAM
Q0 1
/Q0 2
Q1 3
/Q1 4
8 V_CC
7D
6 /D
5 V_EE
Available in 8-Pin SOIC and MSOP Packages
PIN NAMES
Pin
D, /D
Q0, Q1, /Q0, /Q1
V_CC
V_EE
Function
ECL Data Inputs
ECL Data Outputs
Positive Supply
Negative Supply
ECL Pro is a trademark of Micrel, Inc.
1
Rev.: C Amendment: /0
Issue Date: March 2003