MIC4416_05 Datasheet, PDF (3/10 Pages) Micrel Semiconductor – IttyBitty™ Low-Side MOSFET Driver

MIC4416/4417
Absolute Maximum Ratings
Supply Voltage (V_S) .................................................... +20V
Control Voltage (V_CTL) .................................. –20V to +20V
Gate Voltage (V_G) ....................................................... +20V
Junction Temperature (T_J) ........................................ 150°C
Lead Temperature, Soldering ................... 260°C for 5 sec.
Micrel, Inc.
Operating Ratings
Supply Voltage (V_S) ....................................... +4.5 to +18V
Control Voltage (V_CTL) .......................................... 0V to V_S
Ambient Temperature Range (T_A) ............. –40°C to +85°C
Thermal Resistance (θ_JA)...................................... 220°C/W
(soldered to 0.25in² copper ground plane)
Electrical Characteristics^{(Note 3)}
Parameter
Supply Current
Control Input Voltage
Control Input Current
Delay Time, V_CTL Rising
Delay Time, V_CTL Falling
Output Rise Time
Output Fall Time
Gate Output Offset Voltage
Output Resistance
Gate Output Reverse Current
Condition (Note 1)
4.5V ≤ V_S ≤ 18V
4.5V ≤ V_S ≤ 18V
0V ≤ V_CTL ≤ V_S
V_S = 5V
V_S = 18V
V_S = 5V
V_S = 18V
V_S = 5V
V_S = 18V
V_S = 5V
V_S = 18V
4.5V ≤ V_S ≤ 18V
V_S = 5V, I_OUT = 10mA
V_S = 18V, I_OUT = 10mA
No latch up
V_CTL = 0V
V_CTL = 5V
V_CTL for logic 0 input
V_CTL for logic 1 input
C_L = 1000pF, Note 2
C_L = 1000pF, Note 2
C_L = 1000pF, Note 2
C_L = 1000pF, Note 2
C_L = 1000pF, Note 2
C_L = 1000pF, Note 2
C_L = 1000pF, Note 2
C_L = 1000pF, Note 2
V_G = high
V_G = low
P-channel (source) MOSFET
N-channel (sink) MOSFET
P-channel (source) MOSFET
N-channel (sink) MOSFET
Min Typ Max Units
50
200
µA
370 1500 µA
0.8
V
2.4
V
–10
10
µA
42
ns
33
60
ns
42
ns
23
40
ns
24
ns
14
40
ns
28
ns
16
40
ns
–25
mV
25
mV
7.6
Ω
7.8
Ω
3.5
10
Ω
3.5
10
Ω
250
mA
General Note: Devices are ESD protected, however handling precautions are recommended.
Note 1: Typical values at T_A = 25°C. Minimum and maximum values indicate performance at –40°C ≥ T_A ≥ +85°C. Parts production tested at 25°C.
Note 2: Refer to “MIC4416 Timing Definitions” and “MIC4417 Timing Definitions” diagrams (see next page).
Note 3: Specification for packaged product only.
May 2005
3
MIC4416/4417