MIC22950 Datasheet, PDF (22/22 Pages) Micrel Semiconductor – 10A Integrated Switch Synchronous Buck Regulator with Frequency Programmable to 2MHz

Micrel, Inc.
Recommended Land Pattern for 32-Pin 5mm x 5mm MLF^®
MIC22950
Red circle indicates Thermal Via. Size should be 300 – 350mm in diameter, 1.00mm pitch, and it should be connected to
GND plane for maximum thermal performance.
Green rectangle (with shaded area) indicates Solder Stencil Opening on exposed pad area. Size should be 0.87 x
0.87mm in size, 1.07mm pitch.
MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA
TEL [phone] FAX [phone] WEB http://www.micrel.com
The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its
use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer.
Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product
can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant
into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A
Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is a Purchaser’s own risk and Purchaser agrees to fully
indemnify Micrel for any damages resulting from such use or sale.
© 2009 Micrel, Incorporated.
February 2010
22
M9999-021910-B