PL602-04 Datasheet, PDF (2/4 Pages) Micrel Semiconductor – Low Phase Noise CMOS XO (96MHz to 200MHz)

PL602-04
Low Phase Noise CMOS XO (96MHz to 200MHz)
PIN DESCRIPTIONS
Name
CLK
VDD
OE
XIN
XOUT
N/C
GND
Number
1
2
3
4
5
6
7, 8
Type
Description
O Output clock.
P power supply.
I
Output enable input. Disables (tri-state) output when low. Internal pull-up
enables output by default if pin is not connected to low.
I Crystal input. See Crystal Specification on page 3.
I Crystal output. See Crystal Specification on page 3.
- Not connected.
P Ground.
ELECTRICAL SPECIFICATIONS
1. Absolute Maximum Ratings
PARAMETERS
Supply Voltage
Input Voltage, dc
Output Voltage, dc
Storage Temperature
Ambient Operating Temperature*
Lead Temperature (soldering, 10s)
ESD Protection, Human Body Model
SYMBOL
VDD
VI
VO
TS
TA
MIN.
-0.5
-0.5
-65
-40
MAX.
4.6
VDD+0.5
VDD+0.5
150
85
260
2
UNITS
V
V
V
C
C
C
kV
Exposure of the device under conditions beyond the limits specified by Maximum Ratings for e xtended periods may cause permanent damage to the
device and affect product reliability. These conditions represent a stress rating only, and functional operations of the dev ice at these or any other con-
ditions above the operational limits noted in this specification is not implied.
* Note: Operating Temperature is guaranteed by design for all parts (COMMERCIAL and INDU STRIAL), but tested for COMMERCIAL grade only.
2. DC Specifications
PARAMETERS
Supply Current, Dynamic, with
Loaded Outputs
Operating Voltage
Output drive current
(High Drive)
Output drive current
(Standard Drive)
SYMBOL
IDD
VDD
IOH
IOL
IOH
IOL
CONDITIONS
FXIN = 12 - 25MHz
Output load of 10pF
VOH= VDD-0.4V, VDD=3.3V
VOL = 0.4V, VDD = 3.3V
VOH= VDD-0.4V, VDD=3.3V
VOL = 0.4V, VDD = 3.3V
MIN. TYP. MAX. UNITS
35
mA
2.97
3.63
V
30
mA
30
mA
10
mA
10
mA
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel [phone] • fax [phone] • www.micrel.com Rev 11/16/11 Page 2