 English |
|
|
|
|
|
|
|
| MIC5841 Datasheet, PDF (2/7 Pages) Micrel Semiconductor – 8-Bit Serial-Input Latched Drivers | |||
| |||
| ◁ |
MIC5841/5842
Micrel
Pin Configuration
(20-Pin PLCC)Top View.
NC 4
VSS 5
VDD 6
SERIAL DATA OUT 7
NC 8
32
1 20 19
18 OUT 3
MIC5842BV
17 OUT 4
16 OUT 5
15 OUT 6
14 OUT 7
9 10 11 12 13
Absolute Maximum Ratings (Note 1, 2, 3)
at 25°C Free-Air Temperature and VSS = 0V
Output Voltage, VCE (MIC5841)
50V
(MIC5842)
80V
Output Voltage, VCE(SUS) (MIC5841) (Note 1)
35V
(MIC5842)
50V
Logic Supply Voltage, VDD
15V
VDD with Reference to VEE
25V
Emitter Supply Voltage, VEE
Input Voltage Range, VIN
â20V
â0.3V to VDD + 0.3V
Continuous Output Current, IOUT
500mA
Package Power Dissipation, PD (Note 2)
Operating Temperature Range, TA
Storage Temperature Range, TS
1.82W
â55°C to +85°C
â65°C to +150°C
Note 1: For Inductive load applications.
Note 2: Derate at the rate of 18.2mW/°C above TA = 25°C (Plastic DIP)
Note 3: CMOS devices have input-static protection but are susceptible to
damage when exposed to extremely high static electrical
charges.
Electrical Characteristics at TA = 25°C VDD = 5V, VSS = VEE = 0V (unless otherwise noted)
Characteristic
Output Leakage Current
Symbol
ICEX
Collector-Emitter
Saturation Voltage
Collector-Emitter
Sustaining Voltage
Input Voltage
Input Resistance
Supply Current
Clamp Diode
Leakage Current
Clamp Diode
Forward Voltage
VCE(SAT)
VCE(SUS)
(Note 5)
VIN(0)
VIN(1)
RIN
IDD(ON)
IDD(OFF)
IR
VF
Applicable
Devices
MIC5841
MIC5842
Both
MIC5841
MIC5842
Both
Both
Both
Both
Both
MIC5841
MIC5842
Both
Test Conditions
VOUT = 50V
VOUT = 50V, TA = +70°C
VOUT = 80V
VOUT = 80V, TA = +70°C
IOUT = 100mA
IOUT = 200mA
IOUT = 350mA, VDD = 7.0V
IOUT = 350mA, L = 2mH
IOUT = 350mA, L = 2mH
VDD = 12V
VDD = 10V
VDD = 5.0V (See Note 4)
VDD = 12V
VDD = 10V
VDD = 5.0V
All Drivers ON, VDD = 12V
All Drivers ON, VDD = 10V
All Drivers ON, VDD = 5.0V
All Drivers OFF, VDD = 12V
All Drivers OFF, VDD = 10V
All Drivers OFF, VDD = 5.0V
VR = 50V
VR = 80V
IF = 350mA
Limits
Min.
Max.
Unit
50
µA
100
50
100
1.1
V
1.3
1.6
35
V
7
50
0.8
V
10.5
8.5
3.5
50
kâ¦
50
50
16
mA
14
8.0
2.9
2.5
1.6
50
µA
50
2.0
V
Note 4: Operation of these devices with standard TTL may require the use of appropriate pull-up resistors to insure an
input logic HIGH.
Note 5: Not 100% tested. Guaranteed by design.
October 1998
7-43
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese