MIC4826 Datasheet, PDF (2/12 Pages) Micrel Semiconductor – Low Input Voltage, 160VPP Output Voltage, EL Driver

MIC4826
Pin Configuration
VDD 1
RSW 2
REL 3
GND 4
8 VA
7 VB
6 CS
5 SW
8-Pin MSOP Package (MM)
Micrel
Pin Description
Pin Number
1
2
3
4
5
6
7
8
Pin Name
VDD
RSW
REL
GND
SW
CS
VB
VA
Pin Function
Supply (Input): 1.8V to 5.5V for internal circuitry.
Switch Resistor (External Component): Set switch frequency of the internal
power MOSFET by connecting an external resistor to VDD. Connecting the
external resistor to GND disables the switch oscillator and shutdown the
device.
EL Resistor (External Component): Set EL frequency of the internal H-bridge
driver by connecting an external resistor to VDD. Connecting the external
resistor to GND disables the EL oscillator.
Ground Return.
Switch Node (Input): Internal high-voltage power MOSFET drain.
Regulated Boost Output (External Component): Connect to the output
capacitor of the boost regulator and connect to the cathode of the diode.
EL Output: Connect to one end of the EL lamp. Polarity is not important.
EL Output: Connect to the other end of the EL lamp. Polarity is not impor-
tant.
MIC4826
2
August 2004