MIC33030 Datasheet, PDF (18/18 Pages) Micrel Semiconductor – 8MHz 400mA Internal Inductor Buck Regulator with HyperLight Load

Micrel Inc.
Recommended Landing Pattern
MIC33030
10-Pin 2.5mm x 2mm MLF^®
All dimensions in mm. Tolerance /- 0.05mm unless noted otherwise.
The red circle indicates a Thermal Via. The Size should be .300-.350 mm in diameter and it should be
connected to GND plane for maximum thermal performance.
Magenta colored pads: Indicate different potential; DO NOT connect to GND plane.
MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA
TEL [phone] FAX [phone] WEB http://www.micrel.com
Micrel makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This
information is not intended as a warranty and Micrel does not assume responsibility for its use. Micrel reserves the right to change circuitry,
specifications and descriptions at any time without notice. No license, whether express, implied, arising by estoppel or otherwise, to any intellectual
property rights is granted by this document. Except as provided in Micrel’s terms and conditions of sale for such products, Micrel assumes no liability
whatsoever, and Micrel disclaims any express or implied warranty relating to the sale and/or use of Micrel products including liability or warranties
relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right.
Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product
can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant
into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A
Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is a Purchaser’s own risk and Purchaser agrees to fully
indemnify Micrel for any damages resulting from such use or sale.
© 2010 Micrel, Incorporated.
February 2011
18
M9999-020311-C