SY10EP16V_06 Datasheet, PDF (1/6 Pages) Micrel Semiconductor – 5V/3.3V HIGH-SPEED DIFFERENTIAL RECEIVER

Micrel, Inc.
5V/3.3V HIGH-SPEED
DIFFERENTIAL RECEIVER
ECL Pro™
ECL^SYP¹r⁰o^E™^P16V
SY10EP16V
FEATURES
■ Faster version of the SY10EL16V
■ Guaranteed AC performance over temperature and
supply voltage:
– DC to 3GHz clock throughput
– <180ps tr/ft time
■ Internal 75kΩ input pulldown resistor
■ Improved output waveform characteristics
■ 10K ECL compatible I/O
■ Available in small 8-pin (3mm) MSOP and SOIC
packages
ECL Pro™
DESCRIPTION
The SY10EP16V is a high-speed differential receiver.
The device is functionally equivalent to the EL16V
devices, with higher performance capabilities. With output
transition times significantly faster than the EL16V, the
SY10EP16V is ideally suited for interfacing with high-
frequency sources.
The SY10EP16V provides a V_BB output for either
single-ended use or as a DC bias for AC coupling to the
device. The V_BB pin should be used only as a bias for
the SY10EP16V as its current sink/source capability is
limited. Whenever used, the V_BB pin should be bypassed
to the most positive supply voltage (V_CC for LVPECL)
applications) via a 0.01µF capacitor.
Under open input conditions (pulled to V_EE), internal
input clamps will force the Q output LOW.
All support documentation can be found on Micrel’s web
site at www.micrel.com.
PIN NAMES
Pin
D, /D
Q, /Q
V_BB
V_CC
V_EE
Function
ECL Data Inputs
ECL Data Outputs
Reference Voltage Output
Positive Power Supply
Negative Power Supply
ECL Pro is a trademark of Micrel, Inc.
M9999-112805
[e-mail] or [phone]
1
Rev.: D Amendment: /0
Issue Date: November 2005