|
MIC5528 Datasheet, PDF (1/14 Pages) Micrel Semiconductor – High-Performance 500mA LDO | |||
|
MIC5528
High-Performance 500mA LDO
in Thin and Extra Thin DFN Packages
General Description
The MIC5528 is a low-power, µCap, low dropout regulator
designed for optimal performance in a very-small footprint.
It is capable of sourcing up to 500mA of output current
while only drawing 38µA of operating current. This high-
performance LDO is a µCap design in a thermally
enhanced 1.2mm à 1.2mm extra thin (0.4mm ht.) DFN
package. It operates with small ceramic output capacitor
for stability, thereby reducing required board space.
Ideal for battery-operated applications, the MIC5528 offers
±2% accuracy, extremely low dropout voltage (260mV @
500mA), and can regulate output voltages down to 1.0V.
Equipped with a TTL logic-compatible enable pin, the
MIC5528 can be put into a zero-off-mode current state,
drawing no current when disabled.
The MIC5528 is a µCap design, operating with very small
ceramic output capacitors for stability, reducing required
board space and component cost for space-critical
applications. The MIC5528 has an operating junction
temperature range of â40°C to 125°C.
Datasheets and support documentation are available on
Micrelâs web site at: www.micrel.com.
Features
⢠Input voltage range: 2.5V to 5.5V
⢠Fixed output voltages down to 1.0V
⢠±2% Room temperature accuracy
⢠Low quiescent current 38µA
⢠Stable with 2.2µF ceramic output capacitors
⢠Low dropout voltage 260mV @ 500mA
⢠Auto discharge and internal enable pulldown
⢠Thermal-shutdown and current-limit protection
⢠6-pin 1.2mm à 1.2mm extra thin DFN package
⢠6-pin 1.2mm à 1.2mm thin DFN package
Applications
⢠Portable communication equipment
⢠DSC, GPS, PMP, and PDAs
⢠Portable medical devices
⢠5V POL applications
Typical Application
Micrel Inc. ⢠2180 Fortune Drive ⢠San Jose, CA 95131 ⢠USA ⢠tel +1 (408) 944-0800 ⢠fax + 1 (408) 474-1000 ⢠http://www.micrel.com
May 5, 2014
Revision 1.1
|
▷ |