|
MIC2871 Datasheet, PDF (1/24 Pages) Micrel Semiconductor – 1.2A High-Brightness LED Flash Driver with Single-Wire Serial Interface | |||
|
MIC2871
1.2A High-Brightness LED Flash Driver with
Single-Wire Serial Interface
General Description
The MIC2871 is a high-current, high-efficiency flash LED
driver. The LED driver current is generated by an
integrated inductive boost converter with a 2MHz switching
frequency which allows the use of very small inductor and
output capacitor. These features make the MIC2871 an
ideal solution for high-resolution camera phone LED flash
light driver applications.
The MIC2871 operates in either flash or torch modes that
can be controlled through the single-wire serial interface
and/or external control pins. Default flash and torch
brightness can be adjusted via an external resistor. A
robust single-wire serial interface allows simple control by
the host processor to support typical camera functions
such as auto-focus, white balance, and image capture
(flash mode).
The MIC2871 is available in a 14-pin 3mm à 2mm LDFN
package with a junction temperature range of â40°C to
+125°C.
Datasheets and support documentation are available on
Micrelâs web site at: www.micrel.com.
Features
⢠Up to 1.2A flash LED driving current
⢠Highly-efficient, synchronous boost driver (up to 94%)
⢠±5% LED current accuracy
⢠Control through single-wire serial interface or external
control pins
⢠Input voltage range: 2.7V to 5.5V
⢠True load disconnect
⢠Configurable safety time-out protection
⢠Output overvoltage protection (OVP)
⢠LED short detection and protection.
⢠1µA shutdown current
⢠Available in 14-pin 3mm à 2mm LDFN package
Applications
⢠Camera phones/mobile handsets
⢠Cell phones/smartphones
⢠LED light for image capture/auto focus/white balance
⢠Handset video light (torch light)
⢠Digital cameras
⢠Portable applications
Typical Application
Micrel Inc. ⢠2180 Fortune Drive ⢠San Jose, CA 95131 ⢠USA ⢠tel +1 (408) 944-0800 ⢠fax + 1 (408) 474-1000 ⢠http://www.micrel.com
May 29, 2013
052913-1.0 (while in progress)
Revision 1.0 (final document)
|
▷ |