MLX16303 Datasheet, PDF (6/20 Pages) Melexis Microelectronic Systems – Bi-directional Remote Sensor Unit Interface

MLX16303
Bi-directional Remote Sensor Unit Interface
4. MLX16303 electrical specifications
Tamb = -40 to 85°C and Tj = -40 to 150°C
VS operation supply voltage range 4.9V to 7.7 V (Remote unit connection OUTx to RETx pin) or
VS operation supply voltage range 6.0V to 7.7 V (Remote unit connection OUTx to GND pin)
VP programming voltage range 9.6V to 16.2V
All voltages are referenced to the GND pins potential if no other voltage potential is mentioned
Parameter
Symbol Conditions Min Max Units
VS (sidesat connection OUTx to RETx pin)
Supply Voltage Range
Vvs
Supply current OUT0 and OUT1 switched off
Ivsoff
Supply current OUT0 and OUT1 switched on
Ivson
At 6.0V ≤ VS ≤ 7.7V, IOUT0 = IOUT1 = 45 mA
Supply current OUT0 and OUT1 switched on
Ivson
At 4.9V ≤ VS ≤ 6.0V, IOUT0 = IOUT1 = 35 mA
VS (sidesat connection OUTx to GND pin)
Supply Voltage Range
Vvs
Supply current OUT0 and OUT1 switched off
Ivoff
Supply current OUT0 and OUT1 switched on
Ivson
IOUT0 = IOUT1 = 45 mA
VDD
VDD Voltage Range
Vvdd
VDD Supply current
Ivdd
VP threshold
Threshold Voltage for entering in Programming Mode Vvp
(limits are relative to Vdd, rising edge)
Hysteresis of threshold Voltage for entering in
Programming Mode (limits are relative to Vdd)
VP
Programming Voltage Range
Vvp
4.9 7.7 V
6
mA
100 mA
80 mA
6.0 7.7 V
6
mA
100 mA
4.9 5.1 V
1.5 mA
@25°C
@25°C
9.4 9.6 V
0.05 0.15 V
9.6 16.2 V
3901016303
Rev. 004
Page 6 of 20
Data Sheet
Jun/04