|
MLX71120_12 Datasheet, PDF (29/31 Pages) Melexis Microelectronic Systems – FSK/FM/ASK Receiver | |||
|
◁ |
MLX71120
300 to 930MHz
FSK/FM/ASK Receiver
7 Standard information regarding manufacturability of Melexis
products with different soldering processes
Our products are classified and qualified regarding soldering technology, solderability and moisture sensitiv-
ity level according to following test methods:
Reflow Soldering SMDâs (Surface Mount Devices)
⢠IPC/JEDEC J-STD-020
Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices
(classification reflow profiles according to table 5-2)
⢠EIA/JEDEC JESD22-A113
Preconditioning of Nonhermetic Surface Mount Devices Prior to Reliability Testing
(reflow profiles according to table 2)
Wave Soldering SMDâs (Surface Mount Devices) and THDâs (Through Hole Devices)
⢠EN60749-20
Resistance of plastic- encapsulated SMDâs to combined effect of moisture and soldering heat
⢠EIA/JEDEC JESD22-B106 and EN60749-15
Resistance to soldering temperature for through-hole mounted devices
Iron Soldering THDâs (Through Hole Devices)
⢠EN60749-15
Resistance to soldering temperature for through-hole mounted devices
Solderability SMDâs (Surface Mount Devices) and THDâs (Through Hole Devices)
⢠EIA/JEDEC JESD22-B102 and EN60749-21
Solderability
For all soldering technologies deviating from above mentioned standard conditions (regarding peak tempera-
ture, temperature gradient, temperature profile etc) additional classification and qualification tests have to be
agreed upon with Melexis.
The application of Wave Soldering for SMDâs is allowed only after consulting Melexis regarding assurance of
adhesive strength between device and board.
Melexis is contributing to global environmental conservation by promoting lead free solutions. For more in-
formation on qualifications of RoHS compliant products (RoHS = European directive on the Restriction Of
the use of certain Hazardous Substances) please visit the quality page on our website:
http://www.melexis.com/quality.aspx
8 ESD Precautions
Electronic semiconductor products are sensitive to Electro Static Discharge (ESD).
Always observe Electro Static Discharge control procedures whenever handling semiconductor products.
39010 71120
Rev. 008
Page 29 of 31
Data Sheet
Jun/12
|
▷ |