MLX90360KGO-ACD Datasheet, PDF (24/35 Pages) Melexis Microelectronic Systems – TriaxisÒ Position Sensor IC

LT11V
MT7V
4.5-5.5V
LT4V
POR
MLX90360
Triaxis^® Position Sensor IC
Diagnostic
No Diagnostic
EE_DIAG = 1
EE_DIAG = 0
Pull-Up
Voltage
EE_DIAG = 1
Pull-Up
Voltage
EE_DIAG = 0
Figure 12 - Output voltage in diagnostic modes over supply voltage.
14.6.3. HAMHOLE Parameter
The HAMHOLE parameter enables or disables the memory recovery based on Hamming codes in case of
EEPROM CRC error. By default, the memory recovery and EEPROM CRC check are disabled
(Hamhole=3131h). These two features are enabled automatically when locking the part (see paragraph
14.7).
14.7. Lock
The LOCK parameter locks all the parameters set by the user. Once the lock is enabled, it is not possible
to change the EEPROM values anymore as PTC communication in writing mode is not available
anymore.
Note that the lock bit should be set by the solver function “MemLock”.
MLX90360
Rev. 009
Page 24 of 35
Datasheet
Dec/13