MLX92213 Datasheet, PDF (10/11 Pages) Melexis Microelectronic Systems – MicroPower & Low-Voltage Hall Effect Latch with Enable

MLX92213
MicroPower & Low-Voltage
Hall Effect Latch with Enable
14 LD Package (UTQFN-6L)
1.50 BSC
0.75 BSC
INDEX AREA
see note 2
Terminal Tip
SEATING PLANE
0.50 BSC
R 0. 20
INDEX AREA
see note 2
0.25^+/-0.05
see note 4
Notes:
1. All dimensions are in millimeters.
2. The terminal #1 identifier and terminal numbering
convention shall conform JEDEC publication 95
SPP-002. Details of terminal #1 identifier are
optional, but must be located within the zone
indicated. The terminal #1 identifier may be
marked feature.
3. Depopulation is possible in a symmetrical fashion.
4. Pad length applies to metallized terminal and is
measured between 0.15mm and 0.30mm from the
terminal tip. If the terminal has the optional radius
on the other end of the terminal, the pad length
should not be measured in that radius area.
Marking:
1^st Line : .13
“.” (dot) - used to show the 1^st pin
13 - Name of the device (MLX92213)
2^nd Line : YWW
Y - Year (last digit)
WW - Calendar Week
EXPOSED PAD
1. 1 0^{+/- 0. 10}
390109221302
Rev 003
Page 10 of 11
Data Sheet
Mar/12