MLX90215 Datasheet, PDF (10/10 Pages) List of Unclassifed Manufacturers – Precision Programmable Linear Hall Effect Sensor

MLX90215
Precision Programmable
Linear Hall Effect Sensor
Reliability Information
Melexis devices are classified and qualified regarding suitability for infrared, vapor phase and wave soldering
with usual (63/37 SnPb-) solder (melting point at 183degC).
The following test methods are applied:
IPC/JEDEC J-STD-020A (issue April 1999)
Moisture/Reflow Sensitivity Classification For Nonhermetic Solid State Surface Mount Devices
CECC00802 (issue 1994)
Standard Method For The Specification of Surface Mounting Components (SMDs) of Assessed Quality
MIL 883 Method 2003 / JEDEC-STD-22 Test Method B102
Solderability
For all soldering technologies deviating from above mentioned standard conditions (regarding peak tempera-
ture, temperature gradient, temperature profile etc) additional classification and qualification tests have to be
agreed upon with Melexis.
The application of Wave Soldering for SMD’s is allowed only after consulting Melexis regarding assurance of
adhesive strength between device and board.
For more information on manufacturability/solderability see quality page at our website:
http://www.melexis.com/
For the latest version of this document, go to our website at:
www.melexis.com
Or for additional information contact Melexis Direct:
Europe and Japan:
Phone: [phone]
E-mail: [e-mail]
All other locations:
Phone: [phone]
E-mail: [e-mail]
QS9000, VDA6.1 and ISO14001 Certified
Disclaimer
Devices sold by Melexis are covered by the warranty and patent indemnification provisions appearing in its
Term of Sale. Melexis makes no warranty, express, statutory, implied, or by description regarding the informa-
tion set forth herein or regarding the freedom of the described devices from patent infringement. Melexis re-
serves the right to change specifications and prices at any time and without notice. Therefore, prior to design-
ing this product into a system, it is necessary to check with Melexis for current information. This product is
intended for use in normal commercial applications. Applications requiring extended temperature range, un-
usual environmental requirements, or high reliability applications, such as military, medical life-support or
life-sustaining equipment are specifically not recommended without additional processing by Melexis for each
application.
The information furnished by Melexis is believed to be correct and accurate. However, Melexis shall not be
liable to recipient or any third party for any damages, including but not limited to personal injury, property
damage, loss of profits, loss of use, interrupt of business or indirect, special incidental or consequential dam-
ages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data
herein. No obligation or liability to recipient or any third party shall arise or flow out of Melexis’ rendering of
technical or other services.
© 2002 Melexis NV. All rights reserved.
3901090215
Rev 007
Page 10
9/09/03