|
EVB90615 Datasheet, PDF (1/30 Pages) Melexis Microelectronic Systems – Infra Red Thermometer | |||
|
MLX90615
Infra Red Thermometer
Features and Benefits
 Small size, low cost
 Easy to integrate
 Factory calibrated in wide temperature range:
-40 to 85 ËC for sensor temperature and
-40 to 115 ËC for object temperature.
 High accuracy of 0.5°C over wide temperature
range (0..+50°C for both Ta and To)
 High (medical) accuracy calibration
 Measurement resolution of 0.02°C
 SMBus compatible digital interface
 Power saving mode
 Customizable PWM output for continuous
reading
 Embedded emissivity compensation
 3V supply voltage
Applications Examples
 High precision non-contact temperature
measurements;
 Hand-held thermometers
 Ear thermometers
 Home appliances with temperature control;
 Healthcare;
 Livestock monitoring;
 Multiple zone temperature control â up to 100
sensors can be read via common 2 wires
Ordering Information
Part No.
MLX90615
Temperature Code Package Code
E (-40°C to 85°C) SG (TO-46)
Example :
MLX90615ESG-DAA
Accuracy grade
Medical âDAA
1 Functional diagram
J1
SCL
MLX90615 4
U1
Vss
SDA
1 SDA
SCL 3
Vdd
GND
CON1
Vdd
C1
2
0.1uF
C1 value and type may differ
in different applications
for optimum EMC
Figure 1 Typical application schematics â
MLX90615 connection to SMBus
2 General Description
The MLX90615 is an Infra Red thermometer for non
contact temperature measurements. Both the IR sensitive
thermopile detector chip and the signal conditioning chip
are integrated in the same TO-46 can package.
Thanks to its low noise amplifier, 16-bit ADC and powerful
DSP unit, a high accuracy and resolution of the
thermometer is achieved.
The thermometer comes factory calibrated with the digital
SMBus compatible interface enabled. Readout resolution is
0.02°C.
3901090615
Rev 001
Page 1 of 30
Data Sheet
28/Aug/2008
|
▷ |