MDT10P721 Datasheet, PDF (8/21 Pages) Micon Design Technology Corporation – 8-bit micro-controller

MDT10P721
Bit Symbol
Function
5
SCMEN 0 : disable SCM, then PC3, PC4, PC5 is I/O port.
1 : enable SCM
6 SCMROI 0 : No overflow
1 : Overflow
7
WCOL 0 : No collision
1 : The SCMBUF is written while it is still transmitting the previous word
(19) CCPL : R15
Capture/Compare/PWM LSB
(20) CCPH : R16
Capture/Compare/PWM MSB
(21) CCPCTL : R17
Bit Symbol
Function
3~0 CCPM3 0 0 0 0 : CCP off
~
0 1 0 0 : Capture mode , every falling edge
CCPM0 0 1 0 1 : Capture mode , every rising edge
0 1 1 0 : Capture mode , every 4^th rising edge
0 1 1 1 : Capture mode , every 16^th rising edge
1 0 0 0 : Compare mode , set output on match
1 0 0 1 : Compare mode , clear output on match
1 0 1 0 : Compare mode , generate software interrupt on match
1 0 1 1 : Compare mode , trigger special event
1 1 x x : PWM mode
5~4 PWMLSB These bits are the two LSBs of the PWM duty cycle
7~6
--
Unimplemented
(22) ADRES ( A/D result register ) : R1E
(23) ADS0 ( A/D Status Register ) : R1F
Bit
Symbol
Function
0
ADRUN 0 : A/D converter module is shut off and consumes no operating current
1 : A/D converter module is operating
1
--
Unimplemented
2 GO/DONEB 0 : A/D conversion in progress
1 : A/D conversion not in progress
This specification are subject to be changed without notice. Any latest information
please preview http;//www.mdtic.com.tw
P. 8
2005/6 Ver. 2.0