English
Language : 

MDT10P74BA Datasheet, PDF (15/24 Pages) Micon Design Technology Corporation – 8-bit micro-controller
MDT10P74(BA)
Bit Symbol
Function
0:Stop bit was not detected last.
4 I2C_STOP
1:Indicates that a stop bit has been detected last.
0:Indicates that the last byte received or transmitted was address.
5 I2C_DAB
1:Indicates that the last byte received or transmitted was data.
7~6
--
Unimplemented
(44) TXSC: R98
Bit Symbol
Function
0
TX9DF 9th bit of transmit data
1
TSRCF 0: TSR full
1: TSR empty
2
HBRCF 0: Low speed
1: High speed
3
--
Unimplemented
4
UMSF 0: USART asynchronous mode
1: USART synchronous mode
5
TXENF 0: Transmit disable
1: Transmit enable
6 TX9ENF 0: Select 8-bit reception
1: Select 9-bit reception
7
CSSF 0: Slave mode
1: Master mode
(45) BRREG: R99
Baud rate register
(46) ADS1 (A/D Status Register): R9F
Bit Symbol
Function
0 0 0: PA0~3, PA5, PE0~2 = analog input, VREF = VDD
2~0 PAVM2~0 0 0 1: PA0~2, PA5, PE0~2 = analog input, VREF = PA3
0 1 0: PA0~3, PA5 = analog input, PE0~2 = digital I/O, VREF = VDD
0 1 1: PA0~2, PA5 = analog input, PE0~2 = digital I/O, VREF = PA3
1 0 0: PA0, 1, 3 = analog input, PA2, 5, PE0~2 = digital I/O, VREF = VDD
1 0 1: PA0, 1 = analog input, PA2, 5, PE0~2 = digital I/O, VREF = PA3
1 1 x: PA0~3, 5, PE0~2 = digital I/O
7~3
--
Unimplemented
This specification are subject to be changed without notice. Any latest information
please preview http;//www.mdtic.com.tw
P. 15
2008/6 Ver. 1.6