MDT10P74BA Datasheet, PDF (14/24 Pages) Micon Design Technology Corporation – 8-bit micro-controller

MDT10P74(BA)
Bit Symbol
Function
5
RCIE USART receive interrupt enable bit
0: Disable the USART receive interrupt
1: Enable the USART receive interrupt
6
ADIE A/D interrupt enable bit
0: Disable A/D interrupt
1: Enable A/D interrupt
7
PCMIE PCM R/W interrupt enable bit
0: Disable the PCM interrupt
1: Enable the PCM interrupt
(40) PIEB2: R8D
Bit Symbol
0
CCP2IE ^{0: Disable CCP2 interrupt}
1: Enable CCP2 interrupt
7~1
--
Unimplemented
(41) PSTA: R8E
Function
Bit Symbol
Function
0 PRDB
1 PORB
0: Power range-detector Reset occurred
1: No Power range-detector Reset Occurred
0: Power on Reset occurred
1: No Power on Reset occurred
7~2
--
Unimplemented
(42) T2PER: R92
Timer2 period
(43) SCMSTA: R94
Bit Symbol
Function
0
BF
0: Receive not complete
1: Receive complete
I2C_UA 0:Address does not need to be updated.
1 (10 bit I2C 1:Indicates that the user needs to update the address in the sspadd
mode) register.
0:Write
2 I2C_RWB
1:Read
0:Start bit was not detected last.
3 I2C_START
1:Indicates that a start bit has been detected last.
This specification are subject to be changed without notice. Any latest information
please preview http;//www.mdtic.com.tw
P. 14
2008/6 Ver. 1.6