MX10F201FC Datasheet, PDF (1/47 Pages) Macronix International – High-Performance and Low Power Microcontroller designed for Use Many Applications

MX10F201FC
FEATURES OF MX10F201FC (80C51 with MTP memory and LCD)
- 80C51 CPU core
- Two standard 16-bit Timers
- 4.5 ~ 5.5V voltage range
- On-chip Watch Dog Timer
- 2 to 16MHz clock frequency
- Two channel PWM outputs
- 16K bytes MTP memory for code memory
- UART
- 512 bytes internal data RAM
- 8 interrupt sources
- Low power consumption
- 100 pin PQFP package
- Up to 16 digits LCD driver/controller
- Single clock or dual clock
- Four 8 bit general purpose I/O ports
- EMI compatibility
Features list
- 80C51 CPU core
- 4.5 ~ 5.5V operation voltage range
- 2 to 16MHz clock frequency
- 16K bytes MTP memory for code memory
- More than 100 times program/erase cycles
- More than 10 years data retention
- 512 bytes internal data RAM
- Low operation current
- Power saving modes
- User friendly power control for active mode current
- Idle mode
- Sleep mode
- Power down mode, can be wake up by external interrupts or RESET
- LCD driver/controller
- Max. 16-digits display at 1/4 duty LCD
- 1:1(static), 1:2, 1:3 or 1:4 selectable LCD multiplexing rate
- 4 backplane driver, 32 segment driver
- LCD directly drive capability with display memory
- VLCD to control LCD driving voltage, (VLCD-VSS)
- 4x8 general purpose I/O ports
- Provide software I²C capability
- Two standard 16-bit Timers (Timer 0,1)
- On-chip Watch Dog Timer (WDT)
- Two channel PWM outputs
- UART
- Up to 8 interrupt sources and 8 interrupt vectors
- 4 external sources
- 4 internal sources(Timer0,Timer1,watch Timer and UART)
- 100 pin PQFP package
- Single clock or dual clock
- single clock mode : 2~16MHz system clock for CPU,Timer0/1,WDT,UART and LCD
- dual clock mode : 2~16MHz system clock for CPU,Timer0/1,WDT,UART; while 32.768KHz sub-system
clock for LCD and watch timer.
- system clock is either crystal or RC activated
- EMC(Electro-Magnetic Compatibility) improved
P/N:PM0730
REV. 0.1, FEB. 14, 2003
1