UGN3175LTTR Datasheet, PDF (6/6 Pages) Micro Commercial Components – Hall Effect Latches

3175 AND 3177
HALL-EFFECT
LATCHES
PACKAGE DESIGNATOR ‘UA’
Dimensions in Inches
(controlling dimensions)
Dimensions in Millimeters
(for reference only)
0.164
4.17
0.159
4.04
0.062
45°
0.058
1.57
45°
1.47
0.122
0.117
0.085 1
2
3 ^0.031
MAX
0.640
0.600
45°
0.0173
0.0138
SEE NOTE
0.0189
0.0142
0.050
BSC
Dwg. MH-014E in
NOTES: 1.
2.
3.
4.
5.
6.
Tolerances on package height and width represent
allowable mold offsets. Dimensions given are
measured at the widest point (parting line).
Exact body and lead configuration at vendor’s option
within limits shown.
Height does not include mold gate flash.
Recommended minimum PWB hole diameter to clear
transition area is 0.035" (0.89 mm).
Where no tolerance is specified, dimension is nominal.
Supplied in bulk pack (500 pieces per bag).
3.10
2.97
2.16 1
2
3 ^0.79
MAX
16.26
15.24
45°
0.44
0.35
SEE NOTE
0.48
0.36
1.27
BSC
Dwg. MH-014E mm
Radial Lead Form (order A317xxUA-LC)
0.620"
0.500"
(15.7 mm
12.7 mm)
1
2
3
0.108"
(2.74 mm)
www.allegromicro.com
0.100"
(2.5 mm)
Dwg. MH-026
NOTE: Lead-form dimensions are the nominals produced on the
forming equipment. No dimensional tolerance is implied or
guaranteed for bulk packaging (500 pieces per bag).