UGN3175LTTR Datasheet, PDF (4/6 Pages) Micro Commercial Components – Hall Effect Latches

3175 AND 3177
HALL-EFFECT
LATCHES
ELEMENT LOCATIONS
(±0.005” [0.13mm] die placement)
Suffix “LT”
ACTIVE AREA DEPTH
0.0305"
0.775 mm
NOM
0.090"
2.30 mm
0.045"
1.15 mm
A
1
2
3
Dwg. MH-008-1C
Suffix “UA”
ACTIVE AREA DEPTH
0.0195"
0.50 mm
NOM
0.083"
2.12 mm
TYPICAL OPERATING CHARACTERISTICS
200
OPERATE POINT
100
0
V_CC = 14 V
-100
RELEASE POINT
-200
-30
-10
10
30
50
AMBIENT TEMPERATURE IN °C
70
90
Dwg. GH-020
A
BRANDED
SURFACE
1
2
0.055"
1.39 mm
3
Dwg. MH-011C
The products described herein are manufactured under one or
more of the following U.S. patents: 5,045,920; 5,264,783; 5,442,283;
5,389,889; 5,581,179; 5,517,112; 5,619,137; 5,621,319; 5,650,719;
5,686,894; 5,694,038; 5,729,130; 5,917,320; and other patents
pending.
Allegro MicroSystems, Inc. reserves the right to make, from time to
time, such departures from the detail specifications as may be
required to permit improvements in the performance, reliability, or
manufacturability of its products. Before placing an order, the user is
cautioned to verify that the information being relied upon is current.
Allegro products are not authorized for use as critical components
in life-support appliances, devices, or systems without express written
approval.
The information included herein is believed to be accurate and
reliable. However, Allegro MicroSystems, Inc. assumes no responsi-
bility for its use; nor for any infringements of patents or other rights of
third parties that may result from its use.
www.allegromicro.com