DS1020S-15 Datasheet, PDF (9/9 Pages) Maxim Integrated Products – Programmable 8-Bit Silicon Delay Line

TIMING DIAGRAM: SERIAL MODE (S = 0) Figure 8
DS1020
NOTES:
1. All voltages are referenced to ground.
2. @V_CC = 5V and 25°C. Delay accurate on both rising and falling edges within tolerances given in
Table 1.
3. Measured with output open.
4. The “Q” output will only source 4 mA. This pin is only intended to drive other DS1020s.
9 of 9