MAX1586A Datasheet, PDF (8/32 Pages) Maxim Integrated Products – High-Efficiency, Low-IQ PMICs with Dynamic Core for PDAs and Smart Phones

High-Efficiency, Low-I_Q PMICs with
Dynamic Core for PDAs and Smart Phones
ELECTRICAL CHARACTERISTICS (continued)
(V_IN = 3.6V, V_BKBT = 3.0V, V_LBI = 1.1V, V_DBI = 1.35V, circuit of Figure 5, T_A = -40°C to +85°C, unless otherwise noted.) (Note 5)
PARAMETER
RSO Deassert Delay
LBI Input Bias Current
DBI Input Bias Current
LOGIC INPUTS AND OUTPUTS
LBO, DBO, POK, RSO, SDA Output
Low Level
MAX1586
MAX1586
CONDITIONS
2.6V ≤ V7 ≤ 5.5V, sinking 1mA
MIN
MAX UNITS
62
69
ms
-50
nA
75
nA
0.4
V
LBO, DBO, POK, RSO, SDA Output
Low Level
V7 = 1V, sinking 100µA
0.4
V
LBO, DBO, POK, RSO Output-High
Leakage Current
Pin = 5.5V
0.2
µA
ON_, SCL, SDA, SLP, PWM3, MR,
SRAD Input High Level
2.6V ≤ V_IN ≤ 5.5V
1.6
V
ON_, SCL, SDA, SLP, PWM3, MR,
SRAD Input Low Level
2.6V ≤ V_IN ≤ 5.5V
0.4
V
ON_, SCL, SDA, SLP, PWM3, MR,
SRAD Input Leakage Current
Pin = GND, 5.5V
1
1
µA
SERIAL INTERFACE
Clock Frequency
400 kHz
Bus-Free Time Between START and
STOP
1.3
µs
Hold Time Repeated START
Condition
0.6
µs
CLK Low Period
CLK High Period
1.3
µs
0.6
µs
Setup Time Repeated START
Condition
0.6
µs
DATA Hold Time
DATA Setup Time
Setup Time for STOP Condition
0
µs
100
ns
0.6
µs
8 _______________________________________________________________________________________