MAX13013 Datasheet, PDF (7/21 Pages) Maxim Integrated Products – +1.2V to +3.6V, 0.1uA, 100Mbps, Single-/Dual-/Quad-Level Translators

+1.2V to +3.6V, 0.1µA, 100Mbps,
Single-/Dual-/Quad-Level Translators
Pin Description—MAX13013/MAX13014/
MAX3023 (Bidirectional Devices)
MAX3023
TSSOP ^{4 x 3}
UCSP
1
A1
2
B2
3
A2
4
—
5
B3
6
A3
7
A4
8
—
9
B4
10
C4
11
C3
12
C2
13
C1
14
B1
PIN
MAX13013
SC70 ^{3 x 2}
UCSP
4
B2
—
—
MAX13014
SOT23 ^{3 x 3}
UCSP
7
A2
6
A3
5
B1
8
A1
—
—
—
—
—
—
—
—
—
—
—
—
6
B3
5
B1
—
—
—
—
—
—
—
—
—
—
—
—
2
A3
4
B3
1
A1
1
C1
—
—
3
C3
3
A2
2
C2
NAME
FUNCTION
I/O V_L1
I/O V_L2
V_L
Input/Output 1, Referenced to V_L
Input/Output 2, Referenced to V_L
V_L Input Voltage, +1.2V ≤ V_L ≤ V_CC - 0.4V. Bypass V_L to GND
with a 0.1µF capacitor.
N.C.
I/O V_L3
I/O V_L4
EN
EN
No Connection
Input/Output 3, Referenced to V_L
Input/Output 4, Referenced to V_L
Active-High Enable Input. If EN is pulled low, all inputs/outputs
are in tristate. Drive EN high (V_L) for normal operation.
Active-Low Enable Input. If EN is pulled high (V_L), all inputs/
outputs are in tri-state. Drive EN low for normal operation
(MAX3023 TSSOP package only).
I/O V_CC4
I/O V_CC3
GND
Input/Output 4, Referenced to V_CC
Input/Output 3, Referenced to V_CC
Ground
V_CC
V_CC Input Voltage, +1.65V ≤ V_CC ≤ +3.6V. Bypass V_CC to GND
with a 0.1µF capacitor.
I/O V_CC2 Input/Output 2, Referenced to V_CC
I/O V_CC1 Input/Output 1, Referenced to V_CC
Pin Description—MAX13015/MAX13016/MAX13017/
MAX3024–MAX3028 (Unidirectional Devices)
NAME
V_CC
V_L
GND
EN
EN
I V_L1–I V_L4
O V_L1–O V_L4
I V_CC1–I V_CC4
O V_CC1–O V_CC4
FUNCTION (Note 4)
V_CC Input Voltage, +1.65V ≤ V_CC ≤ +3.6V. Bypass V_CC to GND with a 0.1µF capacitor.
V_L Input Voltage, +1.2V ≤ V_L ≤ V_CC - 0.4V. Bypass V_L to GND with a 0.1µF capacitor.
Ground
Active-High Enable Input. If EN is pulled low, all inputs/outputs are in tri-state. Drive EN high (V_L) for normal
operation.
Active-Low Enable Input (MAX3024–MAX3028 TSSOP Package Only). If EN is pulled high (V_L), all
inputs/outputs are in tri-state. Drive EN low for normal operation.
Inputs Referenced to V_L, Numbers 1 to 4
Outputs Referenced to V_L, Numbers 1 to 4
Inputs Referenced to V_CC, Numbers 1 to 4
Outputs Referenced to V_CC, Numbers 1 to 4
Note 4: For specific pin numbers, see the Pin Configurations for more information.
_______________________________________________________________________________________ 7