MAX16134 Datasheet, PDF (5/23 Pages) Maxim Integrated Products – Low-Voltage, Precision, Single/Dual/Triple/Quad-Voltage μP Supervisors

MAX16132–MAX16135
Low-Voltage, Precision, Single/Dual/Triple/
Quad-Voltage μP Supervisors
Absolute Maximum Ratings
V_DD to GND.............................................................-0.3V to +6V
V_IN1, V_IN2, V_IN3, V_IN4 to GND.................................-0.3V to +6V
V_RESET1, V_RESET2, V_RESET3 to GND....................-0.3V to +6V
Maximum Input/Output Current (all pins) .........................±20mA
Continuous Power Dissipation (T_A = +70°C)...................408mW
Operating Temperature Range.......................... -40°C to +125°C
Junction Temperature.......................................................+150°C
Soldering Temperature (Reflow).......................................+260°C
Storage Temperature Range............................. -65°C to +150°C
Lead Temperature ............................................................. 300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these
or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
Package Information
SOT23-8
SOT23-8 Package Drawing Link
PACKAGE CODE
K8+5
Outline Number
Land Pattern Number
21-0078
90-0176
Thermal Resistance, Single-Layer Board:
Junction to Ambient (θ_JA)
Junction to Case (θ_JC)
800
Thermal Resistance, Four-Layer Board:
Junction to Ambient (θ_JA)
196
Junction to Case (θ_JC)
70
For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that a “+”,
“#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing
pertains to the package regardless of RoHS status.
Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer board.
For detailed information on package thermal considerations, refer to www.maximintegrated.com/thermal-tutorial.
Electrical Characteristics
( V_DD = 1.71V to 5.5V, T_A = T_A = T_J = -40°C to +125°C. Typical values are at T_A = +25°C, unless otherwise noted. (Note2))
PARAMETER
SUPPLY VOLTAGE
Operating Voltage Range
Undervoltage-Lockout Threshold
Undervoltage-Lockout Threshold
Hysteresis
Supply Current
SYMBOL
CONDITIONS
V_DD
V_UVLO
V_DD rising
V_{UVLO_HYS} V_DD falling
MIN TYP MAX UNITS
1.71
5.5
V
1.35 1.50 1.65
V
47
mV
Supply Current
I_DD
MAX16134, RESET_ not asserted
5
12.5
30
μA
www.maximintegrated.com
Maxim Integrated │  5