MAX13035EETE Datasheet, PDF (5/18 Pages) Maxim Integrated Products – 6-Channel High-Speed Logic-Level Translators

6-Channel High-Speed Logic-Level Translators
TIMING CHARACTERISTICS (continued)
(V_CC = +2.2V to +3.6V, V_L = +1.62V to +3.2V, C_I/OVL ≤ 15pF, C_I/OVCC ≤ 15pF, R_SOURCE = 150Ω, EN = V_L, I/O V_{L_} to I/O V_{CC_}
rise/fall time = 3ns, T_A = -40°C to +85°C, unless otherwise noted. Typical values are at V_CC = +3.3V, V_L = 1.8V and T_A = +25°C.)
(Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Propagation Delay from
I/O V_{CC_} to I/O V_{L_} after EN
t_EN-VL
R_LOAD = 1MΩ, C_I/OVL = 15pF (Figure 5)
(MAX13030E–MAX13034E)
5
µs
Maximum Data Rate
Push-pull operation, R_SOURCE = 150_,
C_{I/OVCC_} = 10pF, C_{I/OVL_} = 15pF,
100
C_{CLK_VCC} = 10pF, C_{CLK_VL} = 15pF
Mbps
Note 1: All units are 100% production tested at T_A = +25°C. Limits over the operating temperature range are guaranteed by design
and not production tested.
Note 2: V_L must be less than or equal to V_CC - 0.2V during normal operation. However, V_L can be greater than V_CC during startup
and shutdown conditions and the part will not latch-up or be damaged.
Note 3: Guaranteed by design.
Note 4: Input thresholds are referenced to the boost circuit.
_______________________________________________________________________________________ 5