MAX13050ASA Datasheet, PDF (4/20 Pages) Maxim Integrated Products – Industry-Standard High-Speed CAN Transceivers with +80,-80V Fault Protection

MAX13050/MAX13052/MAX13053/MAX13054
Industry-Standard High-Speed CAN
Transceivers with ±80V Fault Protection
DC ELECTRICAL CHARACTERISTICS (continued)
(V_CC = +5V ±5%, V_CC2 = +3V to +3.6V, T_A = T_MIN to T_MAX, unless otherwise noted. Typical values are at V_CC = +5V, V_CC2 = +3.3V,
R_L = 60Ω, and T_A = +25°C.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Input Voltage for Standby
V_IH__RS
0.75 x
V
V_CC
Slope-Control Mode Voltage
V_SLOPE -200µA < I_RS < 10µA
0.4 x
V_CC
0.6 x
V_CC
V
High-Speed Mode Current
I_{IL_RS} V_RS = 0
-500
µA
ESD Protection
IEC 61000-4-2 Contact Discharge Method
±8
kV
per IBEE test facility (Note 3)
TIMING CHARACTERISTICS
(V_CC = +5V ±5%, V_CC2 = +3V to +3.6V, R_L = 60Ω, C_L = 100pF, T_A = T_MIN to T_MAX, unless otherwise noted. Typical values are at
V_CC = +5V, V_CC2 = +3.3V, and T_A = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Delay TXD to Bus Active
t_ONTXD Figure 1 (Note 4)
66
110
ns
Delay TXD to Bus Inactive
t_OFFTXD
Figure 1
(Note 4)
MAX13050/MAX13052/
MAX13053
MAX13054
61
95
ns
70
110
Delay Bus to Receiver Active
Delay Bus to Receiver Inactive
t_ONRXD Figure 1 (Note 4)
t_OFFRXD Figure 1 (Note 4)
54
115
ns
46
160
ns
Delay TXD to RXD Active
(Dominant Loop Delay)
t_ONLOOP Figure 1 (Note 4)
121 255
ns
Delay TXD to RXD Inactive
(Recessive Loop Delay)
t_OFFLOOP Figure 4 (Note 4)
108 255
ns
Delay TXD to RXD Active
(Dominant Loop Delay) Slew-Rate
Controlled
t_ONLOOP-S MAX13052
R_RS = 24kΩ
(500kbps)
R_RS = 100kΩ
(125kbps)
R_RS = 180kΩ
(62.5kbps)
280 450
ns
0.82 1.6
µs
1.37
5
R_RS = 24kΩ
(500kbps)
386 600
ns
Delay TXD to RXD Inactive (Loop
Delay) Slew-Rate Controlled
t_OFFLOOP-S MAX13052
R_RS = 100kΩ
(125kbps)
R_RS = 180kΩ
(62.5kbps)
0.74 1.6
µs
0.97
5
R_RS = 24kΩ
10
(500kbps)
Differential Output Slew Rate
|SR| MAX13052
R_RS = 100kΩ
(125kbps)
2.7
V/µs
R_RS = 180kΩ
1.6
(62.5kbps)
4
Maxim Integrated