MAX11200EEE Datasheet, PDF (4/19 Pages) Maxim Integrated Products – The MAX11200, MAX11206, MAX11209, MAX11210, and MAX11213 evaluation kits (EV kits) consist of one MAX11200, MAX11206, MAX11209, MAX11210, or MAX11213 evaluation board and software.

MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
5) Verify that green LED D6 on the EV kit board
illuminates, indicating the isolated power supply is
good.
6) Verify that red LED D7 on the EV kit board
illuminates, indicating the microcontroller has
successfully finished the board self-test.
7) Start the EV kit software by opening its icon in the
Windows Start | Programs menu.
8) A Device Select window pops up. Select the device
variant installed on the EV kit board and press the
OK button (Figure 1).
9) The software automatically configures the device
to perform a self-calibration and enables the use of
the self-calibration offset and self-calibration gain
values when computing the final offset and gain-
corrected data value (set the CTRL3 register to
0x18).
10) The EV kit software main window appears (Figure
2). Verify that Hardware: Connected is displayed
on the status bar at the bottom of the main window.
11) Press the Start Conversion & Data Logging
button. The software switches to the Data Analysis
tab (Figure 3), displaying the scope of the sampled
data.
Figure 1. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Software (Device Select Window)
4   _______________________________________________________________________________________