MAX11200EEE Datasheet, PDF (12/19 Pages) Maxim Integrated Products – The MAX11200, MAX11206, MAX11209, MAX11210, and MAX11213 evaluation kits (EV kits) consist of one MAX11200, MAX11206, MAX11209, MAX11210, or MAX11213 evaluation board and software.

MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Detailed Description of Hardware
The MAX11200, MAX11206, MAX11209, MAX11210,
and MAX11213 EV kits are complete evaluation systems
for the MAX11200 family of data converters. The EV kits
provide on-board isolated power supplies and
optocouplers to reduce noise. The EV kits can do simple
real-time data acquisition for the user to evaluate the
performance of the devices.
See Table 3 for a description of all EV kit jumper
configurations.
Signal Routing
When using an external reference, firmly connect the
reference cables on pins 9 and 10 of the J1 connector.
The devices in the MAX11200 family are single-channel
data converters. Normally, the inputs are applied on pins
11 and 12 of the J1 connector.
Using GPIO1, GPIO2, and GPIO3 to control the MAX4782
4-channel multiplexer, 4 channels of signals can be input
to the MAX11200 family devices. See Table 4 for GPIO1,
GPIO2, and GPIO3 functions.
Table 3. Jumper Descriptions (JU1–JU10)
JUMPER
JU1
JU2
JU3
JU4
JU5
JU6
JU7
JU8
JU9
JU10
SHUNT POSITON
1-2*
1-3
1-4
1-2*
2-3
1-2*
2-3
1-2*
2-3
1-2*
2-3
Open*
1-2
Open*
1-2
1-2*
3-4
5-6
7-8
9-10
11-12
1-2*
3-4
5-6
7-8
9-10
11-12
1-2*
Open
*Default position.
DESCRIPTION
ADC CLK connected to on-board 2.4576MHz clock
ADC CLK connected to on-board 2.048MHz clock
ADC CLK connected to a user-supplied clock
ADC REFP connected to on-board 3.0V reference
ADC REFP connected to user-supplied reference EXT_REFP
ADC REFN connected to isolated GND
ADC REFN connected to user-supplied reference EXT_REFN
ADC DVDD connected to on-board 3.3V isolated power supply
ADC DVDD connected to user-supplied power supply
ADC AVDD connected to on-board 3.3V isolated power supply
ADC AVDD connected to user-supplied power supply
Disable 2.4576MHz clock oscillator (reduce noise)
Enable 2.4576MHz clock oscillator
Disable 2.048MHz clock oscillator (reduce noise)
Enable 2.048MHz clock oscillator
ADC AINN connected to REFP
ADC AINN connected to REFN
ADC AINN connected to (REFP+REFN)/2
ADC AINN connected to isolated GND
ADC AINN connected to EXT_AINN
ADC AINN connected to MAX4782, pin Y
ADC AINP connected to REFP
ADC AINP connected to REFN
ADC AINP connected to (REFP+REFN)/2
ADC AINP connected to isolated GND
ADC AINP connected to EXT_AINP
ADC AINP connected to MAX4782, pin X
ADC DVDD connected to on-board 3.3V isolated power supply
ADC DVDD disconnected from on-board 3.3V isolated power supply
(for current measurement)
12   �������������������������������������������������������������������������������������