English
Language : 

MAX1615 Datasheet, PDF (3/8 Pages) Maxim Integrated Products – High-Voltage, Low-Power Linear Regulators for Notebook Computers
High-Voltage, Low-Power Linear Regulators
for Notebook Computers
ELECTRICAL CHARACTERISTICS (continued)
(VIN = 15V, SHDN = VIN, ILOAD = 5µA, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 2)
PARAMETER
SHDN Input Threshold
Voltage
SHDN Input Current
SYMBOL
VIL
VIH
CONDITIONS
V SHDN = 0V or 15V
MIN TYP MAX UNITS
0.25
V
1.4
-1
1
µA
Thermal-Shutdown
Temperature
TSHDN V SHDN = 0V or 15V, hysteresis = +20°C
150
°C
Note 2: Limits are 100% production tested at TA = +25°C. Limits over the operating temperature range are guaranteed through
correlation using standard quality-control (SQC) methods.
Note 3: Pulse tested at VIN = 28V, ILOAD = 30mA to avoid exceeding package power-dissipation limits.
Note 4: Guaranteed by design. Tested with VOUT set to 5V. Dropout voltage is tested by reducing the input voltage until VOUT drops
to 100mV below its nominal value, measured with VIN starting 2V above VOUT.
Note 5: Use at least 1µF minimum for light loads. Add 0.125µF/mA (0.2µF/mA for the MAX1616) for loads greater than 100µA,
not production tested. See Capacitor Selection in the Applications Information section.
__________________________________________Typical Operating Characteristics
(VOUT set to 5V, TA = +25°C, unless otherwise noted.)
SAFE LOAD-CURRENT
OPERATING AREA
vs. SUPPLY VOLTAGE
60
VOUT = 5V
50
40
30
20
10
0
0
POWER-
DISSIPATION
LIMIT REGION
5 10 15 20 25 30
SUPPLY VOLTAGE (V)
GROUND CURRENT
vs. SUPPLY VOLTAGE
AT VARIOUS LOADS
8
7
6
65mA
5
55mA
4
3
45mA
2
35mA
25mA 5mA
1
15mA
0
5
10
15
20
25
30
SUPPLY VOLTAGE (V)
SUPPLY CURRENT
vs. SUPPLY VOLTAGE
9.0
8.5
8.0
7.5
7.0
6.5
6.0
TA = +85°C
TA = +25°C
5.5
TA = -40°C
5.0
5
10
15
20
25
30
SUPPLY VOLTAGE (V)
_______________________________________________________________________________________ 3