MAX1165EVKIT Datasheet, PDF (3/5 Pages) Maxim Integrated Products – MAX1165 Evaluation Kit

MAX1165 Evaluation Kit
Table 1. Jumper Functions
JUMPER
JU1
JU2
JU3
JU4
JU5
JU6
FUNCTION
Leave JU1 open to enable the internal reference. Short JU1 when applying an external reference at REF.
Momentarily short JU2 to reset U1 (MAX1165/MAX1065 only). Leave JU2 open and apply high-byte enable signal
(HBEN) at the RESET pad (MAX1166/MAX1066 only).
Short JU3 to drive analog input from MAX4430 buffer U3. Leave JU3 open when driving AIN directly through R2.
Apply conversion start signal (CS) across JU4
Apply read/convert signal (R/C) across JU5
Obtain end-of-conversion (EOC) signal from JU6
Table 2. Device Comparison
PART
RESOLUTION
INTERFACE WIDTH
H1-1 signal
H1-3 signal
H1-5 signal
H1-7 signal
H1-9 signal
H1-11 signal
H1-13 signal
H1-15 signal
H1-17 signal
H1-19 signal
H1-21 signal
H1-23 signal
H1-25 signal
H1-27 signal
H1-29 signal
H1-31 signal
RESET pad
MAX1165
16 bit
16 bit
D0
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
D11
D12
D13
D14
D15
RESET
MAX1166
16 bit
8 bit
D0/D8
D1/D9
D2/D10
D3/D11
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
D4/D12
D5/D13
D6/D14
D7/D15
HBEN
MAX1065
14 bit
16 bit
Not used
Not used
D0
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
D11
D12
D13
RESET
MAX1066
14 bit
8 bit
D0/D8
D1/D9
D2/D10
D3/D11
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
D4/D12
D5/D13
D6/0
D7/0
HBEN
_______________________________________________________________________________________ 3