MAX690T_05 Datasheet, PDF (2/12 Pages) Maxim Integrated Products – 3.0V/3.3V Microprocessor Supervisory Circuits

3.0V/3.3V Microprocessor Supervisory Circuits
ABSOLUTE MAXIMUM RATINGS
Terminal Voltage (with respect to GND)
V_CC.........................................................................-0.3V to 6.0V
VBATT ....................................................................-0.3V to 6.0V
All Other Inputs ...................-0.3V to the higher of V_CC or VBATT
Continuous Input Current
V_CC ..................................................................................100mA
VBATT ...............................................................................18mA
GND ..................................................................................18mA
O–R—uEt—pS—uE—t _{TC–,u–Pr—rFe—On–t ....................................................................18mA}
V_OUT ................................................................................100mA
Continuous Power Dissipation (T_A = +70°C)
Plastic DIP (derate 9.09mW/°C above +70°C) ..............727mW
SO (derate 5.88mW/°C above +70°C) ...........................471mW
CERDIP (derate 8.00mW/°C above +70°C) ...................640mW
Operating Temperature Ranges
MAX690_C_ _/MAX704_C_ _/MAX80_ _C_ _ ........0°C to +70°C
MAX690_E_ _/MAX704_E_ _/MAX80_ _E_ _. .....-40°C to +85°C
MAX690_M_ _/MAX704_M_ _/MAX80_ _M_ _...-55°C to +125°C
Storage Temperature Range .............................-65°C to +160°C
Lead Temperature (soldering, 10sec) .............................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(V_CC = 3.17V to 5.5V for the MAX690T/MAX704T/MAX80_T, V_CC = 3.02V to 5.5V for the MAX690S/MAX704S/MAX80_S, V_CC = 2.72V to
5.5V for the MAX690R/MAX704R/MAX80_R; VBATT = 3.6V; T_A = T_MIN to T_MAX; unless otherwise noted. Typical values are at T_A = +25°C.)
PARAMETER
Operating Voltage Range,
V_CC, VBATT (Note 1)
SYMBOL
CONDITIONS
MAX690_C, MAX704_C, MAX80_ _C
MAX690_E/M, MAX704_E/M, MAX80_ _E/M
MIN TYP MAX UNITS
1.0
5.5
V
1.1
5.5
V_CC Supply Current
(excluding I_OUT)
V_CC Supply Current in Battery-
Backup Mode (excluding I_OUT)
I_SUPPLY
–M—R– _{= VCC}
(MAX704_/
MAX806_)
–M—R– _{= VCC}
(MAX704_/
MAX806_)
MAX690_C/E, MAX704_C/E,
MAX80_ _C/E, V_CC < 3.6V
MAX690_C/E, MAX704_C/E,
MAX80_ _C/E, V_CC < 5.5V
MAX690_M, MAX704_M,
MAX80_ _M, V_CC < 3.6V
MAX690_M, MAX704_M,
MAX80_ _M, V_CC < 5.5V
V_CC = 2.0V, VBATT = 2.3V
40
50
50
65
µA
40
55
50
70
25
50 µA
VBATT Supply Current, Any Mode
(excluding I_OUT) (Note 2)
Battery Leakage Current
(Note 3)
V_OUT Output Voltage
MAX690_C/E, MAX704_C/E, MAX80_ _C/E
MAX690_M, MAX704_M, MAX80_ _M
MAX690_C/E, MAX704_C/E, MAX80_ _C/E
MAX690_M, MAX704_M, MAX80_ _M
MAX690_C/E, MAX704_C/E, MAX80_ _C/E,
I_OUT = 5mA (Note 4)
MAX690_C/E, MAX704_C/E, MAX80_ _C/E
I_OUT = 50mA
MAX690_M, MAX704_M, MAX80_ _M
I_OUT = 5mA (Note 4)
MAX690_M, MAX704_M, MAX80_ _M
I_OUT = 50mA
I_OUT = 250µA, V_CC > 2.5V (Note 4)
0.4
1
µA
0.4
10
0.01
0.5
µA
0.01
5
V_CC - V_CC -
0.03 0.015
V_CC - V_CC -
0.3 0.15
V_CC - V_CC -
V
0.035 0.015
V_CC - V_CC -
0.35 0.15
V_CC - V_CC -
0.0015 0.0006
2 _______________________________________________________________________________________