MAX14566E Datasheet, PDF (2/15 Pages) Maxim Integrated Products – USB Host Charger Identification Analog Switches 2mm x 2mm, 8-Pin TDFN Package

USB Host Charger Identification
Analog Switches
ABSOLUTE MAXIMUM RATINGS
(All voltages referenced to GND.)
VCC, TDP, TDM, CB, DP, DM, CEN/CEN, CB1....-0.3V to +6.0V
Continuous Current into any Terminal............................. Q30mA
Continuous Power Dissipation (TA = +70NC)
TDFN (derate 11.9mW/NC above +70NC).....................954mW
Operating Temperature Range........................... -40NC to +85NC
Junction Temperature......................................................+150NC
Storage Temperature Range............................ -65NC to +150NC
Lead Temperature (soldering, 10s).................................+300NC
Soldering Temperature (reflow).......................................+260NC
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
PACKAGE THERMAL CHARACTERISTICS (Note 1)
TDFN
Junction-to-Ambient Thermal Resistance (qJA)...........84°C/W
Junction-to-Case Thermal Resistance (qJC)................37°C/W
Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-
layer board. For detailed information on package thermal considerations, refer to www.maxim-ic.com/thermal-tutorial.
ELECTRICAL CHARACTERISTICS
(VCC = 2.8V to 5.5V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at VCC = 5.0V, TA = +25NC.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
POWER SUPPLY (MAX14566E/MAX14566AE)
Power-Supply Range
VCC
VCB > VIH
VCB = 0V (Note 3)
Supply Current
VCB = VCC
ICC
VCB = 0V
VCC = 3.3V
VCC = 5.5V
VCC = 4.75V
VCC = 5.25V
Supply Current Increase
DICC
0 P VCB P VIL or VIH P VCB P VCC
POWER SUPPLY (MAX14566BE)
MIN TYP MAX UNITS
2.8
5.5
V
4.75
5.25
V
2
7
FA
110 200
120 200
2
FA
Power-Supply Range
VCC
VCB = VCC and VCB1 = VCC or VCB = VCC
and VCB1 = 0V or VCB = 0V and
2.8
VCB1 = VCC
VCB = 0V and VCB1 = 0V (Note 3)
4.75
5.5
V
5.25
V
Supply Current
Supply Current Increase
ICC
DICC
VCB = VCC and
VCB1 = VCC or
VCB = VCC and
VCB1 = 0V
VCC = 3.3V
VCC = 5.5V
VCB = 0V and
VCB1 = 0V
VCB = 0V and
VCB1 = VCC
VCC = 4.75V
VCC = 5.25V
VCC = 5.0V for TYP
VCC = 5.5V for MAX
VCB1 = 0V; 0 ≤ VCB ≤ VIL
and VIH ≤ VCB ≤ VCC (Note 4)
VCB = 0V; 0 ≤ VCB1 ≤ VIL
and VIH ≤ VCB1 ≤ VCC (Note 4)
2
7
110 200
mA
120 200
3
7
1
mA
1
2