MAX14541E Datasheet, PDF (2/8 Pages) Maxim Integrated Products – 3-Channel, Low-Leakage ESD Protector

3-Channel, Low-Leakage ESD Protector
ABSOLUTE MAXIMUM RATINGS
(Voltages referenced to GND.)
VCC to GND...........................................................-0.3V to +18V
I/O-1, I/O-2, I/O-3 to GND......................... -0.3V to (VCC + 0.3V)
Continuous Power Dissipation (TA = +70NC)
5-Pin SC70 (derate 3.1mW/NC above +70NC)..........246.9mW
Thermal Resistance (Note 1)
BJA.............................................................................324NC/W
BJC.............................................................................115NC/W
Operating Temperature Range......................... -40NC to +125NC
Storage Temperature Range............................ -65NC to +150NC
Junction Temperature......................................................+150NC
Lead Temperature (soldering, 10s).................................+300NC
Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-
layer board. For detailed information on package thermal considerations, refer to www.maxim-ic.com/thermal-tutorial.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these
or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may
affect device reliability.
ELECTRICAL CHARACTERISTICS
(VCC = +5V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25NC.) (Note 2)
PARAMETER
Supply Voltage
Supply Current
Diode Forward Voltage
Channel Clamp Voltage
(Note 3)
SYMBOL
CONDITIONS
MIN
VCC
ICC
VF
IF = 10mA, TA = +25°C
0.9
0.65
TA = +25°C, ±15kV
Human Body Model,
IF = 10A
Positive transients
Negative transients
TA = +25°C, ±8kV
Contact Discharge
Positive transients
VC
(IEC 61000-4-2),
IF = 24A
Negative transients
TYP MAX UNITS
16
V
1
100
nA
0.95
V
VCC +
25
V
-25
VCC +
60
V
-60
TA = +25°C, ±15kV
Air-Gap Discharge
(IEC 61000-4-2),
IF = 45A
Positive transients
Negative transients
VCC +
100
V
-100
V
Channel Leakage Current
(Note 4)
I/O Capacitance
ESD PROTECTION
Human Body Model
IEC 61000-4-2 Air-Gap
Discharge
TA = -40°C to +50°C
TA = -40°C to +125°C
Bias of VCC/2, f = 1MHz (Note 4)
-1
+1
nA
-1
+1
µA
6
7
pF
±15
kV
±15
kV
IEC 61000-4-2 Contact
Discharge
±8
kV
Note 2: Parameters are 100% production tested at TA = +25°C. Specifications over temperature guaranteed by design only.
Note 3: Idealized clamp voltages. See the Applications Information section for more information.
Note 4: Guaranteed by design, not production tested.
2   _______________________________________________________________________________________