 English |
|
|
|
|
|
|
|
| MAX13041_08 Datasheet, PDF (2/20 Pages) Maxim Integrated Products – ±80V Fault-Protected High-Speed CAN Transceiver with Low-Power Management and Wake-On CAN | |||
| |||
| ◁ |
±80V Fault-Protected High-Speed CAN Transceiver
with Low-Power Management and Wake-On CAN
ABSOLUTE MAXIMUM RATINGS
(All voltages referenced to GND.)
VCC, VI/O...................................................................-0.3V to +6V
VBAT........................................................................-0.3V to +80V
TXD, RXD, STB, EN, ERR .........................................-0.3V to +6V
INH, WAKE................................................-0.3V to (VBAT + 0.3V)
CANH, CANL, SPLIT ................................0V to ±80V continuous
Continuous Power Dissipation (TA = +70°C)
14-Pin SO (derate 8.3mW/°C above +70°C).................667mW
Operating Temperature Range .........................-40°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Junction Temperature ......................................................+150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VCC = +4.75V to +5.25V, VI/O = +2.8V to VCC, VBAT = +5V to +76V, TA = TMIN to TMAX, RL = 60Ω, unless otherwise noted. Typical
values are at VCC = +5V, VI/O = +3.3V, VBAT = +12V and TA = +25°C.) (Notes 1, 2)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
VCC Input Voltage
VCC
Operating range
4.75
5.25
V
VI/O Input Voltage
VI/O
Operating range
2.80
5.25
V
VBAT Input Voltage
VBAT Operating range
5
76
V
VCC Undervoltage Detection
Level for Forced Sleep Mode
VCC(SLEEP)
2.75
3.3
4.50
V
VI/O Undervoltage Detection
Level for Forced Sleep Mode
VI/O(SLEEP)
0.5
1.5
2.0
V
VBAT Voltage Level for Failsafe
Fallback Mode
VBAT(STBY) VCC = +5V (fail-safe)
2.75
3.3
4.50
V
VBAT Voltage Level for Setting
PWON Flag
VCC Input Current
VI/O Input Current
VBAT(PWON) VCC = 0V
Normal mode, VTXD = 0V (dominant)
ICC
Normal or PWON/listen-only mode,
VTXD = VI/O (recessive)
Standby or sleep mode
Normal mode, VTXD = 0V (dominant)
II/O
Normal or PWON/listen-only mode,
VTXD = VI/O (recessive)
Standby or sleep mode, VTXD = VI/O
2.5
3.3
4.1
V
55
80
mA
6
10
1.8
8
µA
230 700
1
5
µA
0.7
3
2 _______________________________________________________________________________________
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese