 English |
|
|
|
|
|
|
|
| MAX125_08 Datasheet, PDF (2/15 Pages) Maxim Integrated Products – 2x4-Channel, Simultaneous-Sampling 14-Bit DAS | |||
| |||
| ◁ |
2x4-Channel, Simultaneous-Sampling
14-Bit DAS
ABSOLUTE MAXIMUM RATINGS
AVDD to AGND ...........................................................-0.3V to 6V
AVSS to AGND ............................................................0.3V to -6V
DVDD to DGND ...........................................................-0.3V to 6V
AGND to DGND .......................................................-0.3V to 0.3V
CH_ _ to AGND....................................................................±17V
REFIN, REFOUT to AGND ..........................................-0.3V to 6V
Digital Inputs/Outputs to DGND ..............-0.3V to (DVDD + 0.3V)
Continuous Power Dissipation (TA = +70°C)
SSOP (derate 11.8mW/°C above +70°C) ....................941mW
Operating Temperature Ranges
MAX125CCAX/MAX126CCAX ............................0°C to +70°C
MAX125CEAX/MAX126CEAX ..........................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec)................................300°C
Stresses beyond those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(AVDD = +5V ±5%, AVSS = -5V ±5%, DVDD = +5V ±5%, VREFIN = 2.5V, AGND = DGND = 0V, 4.7µF capacitor from REFOUT to
AGND, 0.1µF capacitor from REFIN to AGND, fCLK = 16MHz, external clock, 50% duty cycle, TA = TMIN to TMAX, unless otherwise
noted.)
PARAMETER
SYMBOL
CONDITIONS
DC ACCURACY (Note 1)
Resolution
N
All channels
Integral Nonlinearity
INL (Note 2)
No Missing Codes
Bipolar Zero Error
Bipolar Zero-Error Match
TA = +25°C
TA = TMIN to TMAX
Between all channels
Zero-Code Tempco
Gain Error
Gain-Error Match
TA = +25°C
TA = TMIN to TMAX
Between all channels
Gain-Error Tempco
DYNAMIC PERFORMANCE (fCLK = 16MHz, fIN = 10.06kHz (Notes 1, 3)
Signal-to-Noise Plus Distortion
Total Harmonic Distortion
SINAD
THD
Single-channel mode,
MAX125
channel 1A, 250ksps (Note MAX126
4)
Single-channel mode, channel 1A,
250ksps (Notes 4, 5)
MIN TYP MAX UNITS
14
Bits
±2
±4
LSB
13
Bits
±5
±15
mV
±25
1.2
5
mV
±5
ppm/°C
±5
±10
mV
±15
1.2
5
mV
±5
ppm/°C
72
75
dB
70
72
-89
-80
dB
Spurious-Free Dynamic Range
SFDR
Single-channel mode, channel 1A,
250ksps (Note 4)
80
90
dB
Channel-to-Channel Isolation
Single-channel mode, channel 1A,
250ksps (Note 6)
80
dB
2 _______________________________________________________________________________________
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese