 English |
|
|
|
|
|
|
|
| MAX1108_03 Datasheet, PDF (2/20 Pages) Maxim Integrated Products – Single-Supply, Low-Power, 2-Channel, Serial 8-Bit ADCs | |||
| |||
| ◁ |
Single-Supply, Low-Power,
2-Channel, Serial 8-Bit ADCs
ABSOLUTE MAXIMUM RATINGS
VDD to GND ..............................................................-0.3V to +6V
CH0, CH1, COM, REF, DOUT to GND .......-0.3V to (VDD + 0.3V)
DIN, SCLK, CS to GND ............................................-0.3V to +6V
Continuous Power Dissipation (TA = +70°C)
10-pin µMAX (derate 5.6mW/°C above +70°C) ............444mW
Operating Temperature Ranges
MAX110_CUB ......................................................0°C to +70°C
MAX110_EUB ...................................................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICSâMAX1108
(VDD = +2.7V to +3.6V; unipolar input mode; COM = GND, fSCLK = 500kHz, external clock mode (50% duty cycle); 10 clocks/conver-
sion cycle (50ksps); 1µF capacitor at REF, external +2.048V reference at REF; TA = TMIN to TMAX; unless otherwise noted. Typical
values are at TA = +25°C.)
PARAMETER
DC ACCURACY
Resolution
Relative Accuracy (Note 1)
Differential Nonlinearity
Offset Error
Gain Error (Note 3)
Gain Temperature Coefficient
Total Unadjusted Error
Channel-to-Channel
Offset Matching
SYMBOL
CONDITIONS
INL
DNL
VDD = 2.7V to 3.6V
VDD = 5.5V (Note 2)
No missing codes over temperature
VDD = 2.7V to 3.6V
VDD = 5.5V (Note 2)
TUE
TA = +25°C
TA = TMIN to TMAX
MIN TYP MAX UNITS
8
bits
±0.15 ±0.5
LSB
±0.2
±1
LSB
±0.2
±1
LSB
±0.5
±1
LSB
±0.8
ppm/°C
±1
LSB
±0.5
±0.1
LSB
VDD / 2 Sampling Accuracy
50
mV
DYNAMIC PERFORMANCE (10kHz sine-wave input, 2.048Vp-p, 50ksps, 500kHz external clock)
Signal-to-Noise Plus Distortion SINAD
49
dB
Total Harmonic Distortion
(up to the 5th harmonic)
THD
-70
dB
Spurious-Free Dynamic Range
Small-Signal Bandwidth
Full-Power Bandwidth
ANALOG INPUTS
Input Voltage Range (Note 4)
SFDR
BW-3dB -3dB rolloff
VCH_
Unipolar input, VCOM = 0
Bipolar input, VCOM or VCH1 = VREF / 2,
referenced to COM or CH1
68
dB
1.5
MHz
0.8
MHz
0
VREF
V
±VREF / 2
Multiplexer Leakage Current
Input Capacitance
On/off-leakage current,
VCOM or VCH = 0 or VDD
CIN
±0.01 ±1
µA
18
pF
2 _______________________________________________________________________________________
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese