MAX11046B Datasheet, PDF (2/10 Pages) Maxim Integrated Products – 8-Channel Simultaneous- Sampling Analog Front End

Figure 1. The Petaluma subsystem design block diagram.
Features
Competitive Advantages
High precision, 8-channel, simultaneous-sampling inputs
High-speed 250ksps sampling rate
High-accuracy 16-bit resolution
Device drivers
Example C source code
Configuration files for ZedBoard™ platform
FMC-compatible
High-performance energy measurement subsystem
Cost optimized
Energy efficient
Applications
Three-phase power measurement
Power grid protection
Multiphase motor control
Vibration and waveform analysis
Detailed Description of Hardware
The Petaluma subsystem is optimized for applications that use multiple high-speed, high-accuracy, simultaneous-sampling analog
inputs. Figure 1 shows the block diagram of the Petaluma reference design.
The MAX44252 devices (U1 and U2) are quadruple ultra-precision, low-noise op amps. The op amps attenuate and buffer the
±10V input signals to match the input range of the ADC (MAX11046). The MAX44252 devices are set up in the inverting
configuration, so the polarity of the signal is reversed at the input of the ADC. The formula to convert the ADC code to voltage is:
10-CODE/65536*20.
Page 2 of 10