DS80C410_09 Datasheet, PDF (2/102 Pages) Maxim Integrated Products – Network Microcontrollers with Ethernet and CAN

DS80C410/DS80C411 Network Microcontrollers with Ethernet and CAN
ABSOLUTE MAXIMUM RATINGS
Voltage Range on Any Input Pin Relative to Ground………………………………………………………..-0.5V to +5.5V
Voltage Range on Any Output Pin Relative to Ground……………………………………………..-0.5V to (V_CC3 + 0.5V)
Voltage Range on V_CC3 Relative to Ground…………………………………………………………………..-0.5V to +3.6V
Voltage Range on V_CC1 Relative to Ground…………………………………………………………………..-0.3V to +2.0V
Operating Temperature Range………………………………………………………………………………..-40°C to +85°C
Junction Temperature……………………………………………………………………………………………..+150°C max
Storage Temperature Range………………………………………………………………………………...-55°C to +160°C
Soldering Temperature………………………………………………………………See IPC/JEDEC J-STD-020 Standard
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is
not implied. Exposure to absolute maximum rating conditions for extended periods can affect device reliability.
DC ELECTRICAL CHARACTERISTICS
(V_CC3 = 3.0V to 3.6V, V_CC1 = 1.8V ±10%, T_A = -40°C to +85°C.) (Note 1)
PARAMETER
Supply Voltage (V_CC3) (Note 2)
Power-Fail Warning (V_CC3) (Note 3)
Power-Fail Reset Voltage (V_CC3) (Note 3)
Active Mode Current (V_CC3) (Note 4)
Idle Mode Current (V_CC3) (Note 4)
Stop Mode Current (V_CC3) (Not 4)
Stop Mode Current, Bandgap Enabled (V_CC3) (Note 4)
Supply Voltage (V_CC1) (Note 2)
Power-Fail Warning (V_CC1) (Note 5)
Power-Fail Reset Voltage (V_CC1) (Note 5)
Active Mode Current (V_CC1) (Note 4)
Idle Mode Current (V_CC1) (Note 4)
Stop Mode Current (V_CC1) (Note 4)
Stop Mode Current, Bandgap Enabled (V_CC1) (Note 4)
Input Low Level
Input Low Level for XTAL1, RST, OW
Input High Level
Input High Level for XTAL1, RST, OW
Output Low Current for Port 1, 3–7 at V_OL = 0.4V
Output Low Current for Port 0, 2, TX_EN, TXD[3:0], MDC, MDIO,
RSTOL, ALE, PSEN, and Ports 3–7 (when used as any of the following:
A21–A0, WR, RD, CE0-7, PCE0-3) at V_OL = 0.4V (Note 6)
Output Low Current for OW, OWSTP at V_OL= 0.4V
Output High Current for Port 1, 3–7 at V_OH = V_CC3 - 0.4V (Note 7)
Output High Current for Port 1, 3–7 at V_OH= V_CC3 - 0.4V (Note 8)
Output High Current for Port 0, 2, TX_EN, TXD[3:0], MDC, MDIO,
RSTOL, ALE, PSEN, and Ports 3–7 (when used as any of the following:
A21–A0, WR, RD, CE0-7, PCE0-3) at V_OH = V_CC3 - 0.4V (Notes 6, 9)
Input Low Current for Port 1–7 at 0.4V (Note 10)
Logic 1-to-0 Transition Current for Port 1, 3–7 (Note 11)
Input Leakage Current, Port 0 Bus Mode, V_IL = 0.8V (Note 12)
Input Leakage Current, Port 0 Bus Mode, V_IH = 2.0V (Note 12)
Input Leakage Current, Input Mode (Note 13)
RST Pulldown Resistance
SYMBOL
V_CC3
V_PFW3
V_RST3
I_CC3
I_IDLE3
I_STOP3
I_SPBG3
V_CC1
V_PFW1
V_RST1
I_CC1
I_IDLE1
I_STOP1
I_SPBG1
V_IL1
V_IL2
V_IH1
V_IH2
I_OL1
I_OL2
I_OL3
I_OH1
I_OH2
I_OH3
I_IL
I_TL
I_TH0
I_TL0
I_L
R_RST
MIN
3.0
2.85
2.76
1.62
1.52
1.47
2.0
2.4
6
12
10
-50
-650
20
-200
-10
50
TYP
3.3
3.00
2.90
16
7
1
100
1.8
1.60
1.55
30
20
3
3
10
20
16
-75
-8
-16
-20
-400
50
-50
0
100
MAX
3.6
3.15
3.05
35
15
10
150
1.98
1.68
1.63
60
50
20
20
0.8
1.0
-50
-4
-8
-10
200
-20
10
200
UNITS
V
V
V
mA
mA
A
A
V
V
V
mA
mA
mA
mA
V
V
V
V
mA
mA
mA
A
mA
mA
A
A
A
A
A
k
2 of 102