DS1086L Datasheet, PDF (2/16 Pages) Maxim Integrated Products – 3.3V Spread-Spectrum EconOscillator

3.3V Spread-Spectrum EconOscillator
ABSOLUTE MAXIMUM RATINGS
Voltage Range on V_CC Relative to Ground ..........-0.5V to +6.0V
Voltage Range on SPRD, PDN, OE, SDA, and SCL
Relative to Ground* ..................................-0.5 to (V_CC + 0.5V)
Operating Temperature Range ...........................-40°C to +85°C
Programming Temperature Range .........................0°C to +70°C
Storage Temperature Range .............................-55°C to +125°C
Soldering Temperature ..................See IPC/JEDEC J-STD-020A
*This voltage must not exceed 6.0V.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
RECOMMENDED DC OPERATING CONDITIONS
(V_CC = 2.7V to 3.6V, T_A = -40°C to +85°C.)
PARAMETER
Supply Voltage
High-Level Input Voltage
(SDA, SCL, SPRD, PDN, OE)
SYMBOL
V_CC (Note 1)
V_IH
CONDITIONS
Low-Level Input Voltage
(SDA, SCL SPRD, PDN, OE)
V_IL
MIN
2.7
0.7 x
V_CC
-0.3
TYP MAX UNITS
3.3
3.6
V
V_CC +
V
0.3
0.3 x
V_CC
V
DC ELECTRICAL CHARACTERISTICS
(V_CC = 2.7V to 3.6V, T_A = -40°C to +85°C.)
PARAMETER
High-Level Output Voltage (OUT)
Low-Level Output Voltage (OUT)
Low-Level Output Voltage (SDA)
High-Level Input Current
Low-Level Input Current
Supply Current (Active)
Standby Current (Power-Down)
SYMBOL
V_OH
V_OL
V_OL1
V_OL2
I_IH
I_IL
I_CC
I_CCQ
CONDITIONS
I_OH = -4mA, V_CC = min
I_OL = 4mA
3mA sink current
6mA sink current
V_CC = 3.6V
V_IL = 0
C_L = 15pF (output at default frequency)
Power-down mode
MIN TYP MAX UNITS
2.4
V
0
0.4
V
0
0.4
V
0
0.6
1
µA
-1
µA
10
mA
10
µA
2 _____________________________________________________________________