 English |
|
|
|
|
|
|
|
| DG441CJ Datasheet, PDF (2/8 Pages) Maxim Integrated Products – Improved, Quad, SPST Analog Switches | |||
| |||
| ◁ |
Improved, Quad, SPST Analog Switches
ABSOLUTE MAXIMUM RATINGS
Voltage Referenced to V-
V+ .........................................................................................44V
GND .....................................................................................25V
VL ...................................................(GND - 0.3V) to (V+ + 0.3V)
Digital Inputs, VS, VD (Note 1)......(V- - 2V) to (V+ + 2V) or 30mA
(whichever occurs first)
Continuous Current (any terminal) ......................................30mA
Peak Current, S or D
(pulsed at 1ms, 10% duty-cycle max) .................................100mA
Continuous Power Dissipation (TA = +70°C)
Plastic DIP (derate 10.53mW/°C above +70°C) ............842mW
Narrow SO (derate 8.70mW/°C above +70°C) ..............696mW
CERDIP (derate 10.00mW/°C above +70°C) .................800mW
Operating Temperature Ranges
DG441C/DG442C .................................................0°C to +70°C
DG441D/DG442D ..............................................-40°C to +85°C
DG441AK/DG442AK .......................................-65°C to +150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec) .............................+300°C
Note 1: Signals on S, D, or IN exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum current ratings.
Stresses beyond those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICSâDual Supplies
(V+ = 15V, V- = -15V, GND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
SWITCH
TYP
(Note 2)
Analog-Signal Range
Drain-Source On-Resistance
VANALOG
rDS(ON)
(Note 3)
V+ = 13.5V, V- = -13.5V, TA = +25°C
IS = -10mA,
VD = 8.5V or -8.5V
TA = TMIN to TMAX
-15
50
On-Resistance Match
Between Channels (Note 4)
ârDS(ON)
V+ = 15V, V- = -15V,
VD = ±10V,
IS = -10mA
TA = +25°C
TA = TMIN to TMAX
On-Resistance Flatness
(Note 4)
V+ = 15V, V- = -15V,
rFLAT(ON) VD = 5V or -5V,
IS = -10mA
TA = +25°C
TA = TMIN to TMAX
Source Off-Leakage Current
(Note 5)
IS(OFF)
V+ = 16.5V, V- = -16.5V,
VD = 15.5V,
VS = ±15.5V
TA = +25°C
C, D
TA = TMAX
A
-0.50 0.01
-5
-20
Drain Off-Leakage Current
(Note 5)
ID(OFF)
V+ = 16.5V, V- = -16.5V,
VD = 15.5V,
VS = ±15.5V
TA = +25°C
C, D
TA = TMAX
A
-.0.50 0.01
-5
-20
Drain On-Leakage Current
(Note 5)
DIGITAL
Input Current with
Input Voltage High
Input Current with
Input Voltage Low
ID(ON)
or
IS(ON)
V+ = 16.5V, V- = -16.5V,
VD = ±15.5V,
VS = ±15.5V
TA = +25°C
C, D
TA = TMAX
A
IINH
VIN = 2.4V
IINL
VIN = 0.8V
-0.50 0.08
-10
-20
-500 0.01
-500 0.01
MAX
15
85
100
4
5
9
15
0.50
5
20
0.50
5
20
0.50
10
20
500
500
UNITS
V
â¦
â¦
â¦
nA
nA
nA
nA
nA
2 _______________________________________________________________________________________
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese