 English |
|
|
|
|
|
|
|
| DG411 Datasheet, PDF (2/12 Pages) Vishay Siliconix – Precision Monolithic Quad SPST CMOS Analog Switches | |||
| |||
| ◁ |
Improved, Quad,
SPST Analog Switches
ABSOLUTE MAXIMUM RATINGS
(All Voltages Referenced to V-.)
V+ .........................................................................................44V
GND .....................................................................................25V
VL .....................................................(GND -0.3V) to (V+ +0.3V)
Digital Inputs, VS, VD (Note 1)........(V- -2V) to (V+ +2V) or 30mA
(whichever occurs first)
Continuous Current (any terminal) ......................................30mA
Peak Current
(pulsed at 1ms, 10% duty cycle max) ............................100mA
Continuous Power Dissipation (TA = +70°C)
16-Pin Plastic DIP (derate 10.53mW/°C above +70°C) .842mW
16-Pin Narrow SO (derate 8.70mW/°C above +70°C) ...696mW
16-Pin CERDIP (derate 10.00mW/°C above +70°C)......800mW
16-Pin TSSOP (derate 6.7mW/°C above +70°C) ...........457mW
16-Pin QFN (derate 19.2mW/°C above +70°C) ...........1538mW
Operating Temperature Ranges
DG41_C_ ..............................................................0°C to +70°C
DG41_D_ ...........................................................-40°C to +85°C
DG41_AK_ .......................................................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Note 1: Signals on S, D, or IN exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum
current rating.
Stresses beyond those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICSâDual Supplies
(V+ = 15V, V- = -15V, VL = 5V, VGND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
SWITCH
Analog Signal Range
VANALOG
Drain-Source
On-Resistance
rDS(ON)
On-Resistance
Match Between Channels
(Note 4)
On-Resistance Flatness
(Note 4)
ÎrDS(ON)
rFLAT(ON)
Source Off-Leakage Current
(Note 7)
IS(OFF)
Drain Off-Leakage Current
(Note 7)
ID(OFF)
Drain On-Leakage Current
(Note 7)
ID(ON)
+
IS(ON)
(Note 3)
V+ = 13.5V,
V- = -13.5V,
VD = ±8.5V,
IS = -10mA
V+ = 15V, V- = -15V,
VD = ±10V,
IS = -10mA
V+ = 15V, V- = -15V,
VD = ±5V, 0V,
IS = -10mA
V+ = 16.5V,
V- = -16.5V,
VD = ±15.5V,
VS = 15.5V
V+ = 16.5V,
V- = -16.5V,
VD = ±15.5V,
VS = 15.5V
V+ = 16.5V,
V- = -16.5V,
VD = ±15.5V,
VS = 15.5V
TA = +25°C
C, D
A
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to
TMAX
C, D, A
C, D
A
TA = +25°C
TA = TMIN to
TMAX
C, D, A
C, D
A
TA = +25°C
TA = TMIN to
TMAX
C, D, A
C, D
A
MIN TYP MAX
(Note 2)
-15
15
17
45
17
30
45
3
5
4
6
-0.25 -0.10 0.25
-5
5
-10
10
-0.25 -0.10 0.25
-5
5
-10
10
-0.4
-0.1
0.4
-20
20
-40
40
UNITS
V
Ω
Ω
Ω
nA
nA
nA
2 _______________________________________________________________________________________
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese